Verified NACE-CIP2-001 Q&As - Pass Guarantee NACE-CIP2-001 Exam Dumps
Check the Free demo of our NACE-CIP2-001 Exam Dumps with 100 Questions
To qualify for the NACE-CIP2-001 certification, candidates must have at least two years of experience in the field of coating inspection and must have completed a NACE-approved training course. Coating Inspector Level 2 certification exam covers a wide range of topics, including coating materials, surface preparation, application methods, inspection techniques, and safety.
To become certified as a Coating Inspector Level 2, candidates must meet certain prerequisites, such as completing an approved training course and acquiring relevant work experience. Once these requirements have been met, candidates can take the NACE-CIP2-001 certification exam, which consists of both a written and practical component. The written exam covers theoretical knowledge, while the practical exam assesses the candidate's ability to perform coating inspections in real-world situations. Upon passing both components of the exam, candidates receive their certification, which is valid for a period of three years before requiring recertification.
NEW QUESTION # 58
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Midstream
- B. Transmission
- C. Gathering
- D. Distribution
Answer: D
NEW QUESTION # 59
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that only in the project would understand
- B. Language that only technical experts would understand
- C. Language that the most would understand
- D. Language that another NACE Inspector would understand
Answer: C
NEW QUESTION # 60
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Accept assignment without hesitation
- B. Advise the prospective employer that you cannot accept the position
- C. Meet with the prospective employer to scope of your role
- D. Review the NACE Attestation prior to making a decision
Answer: D
NEW QUESTION # 61
Corrosion is the reverse process of
- A. hot dipping.
- B. steel manufacturing.
- C. flaking.
- D. galvanic deterioration.
Answer: B
NEW QUESTION # 62
The most likely area of failure on a buried external pipeline coating is the:
- A. Ground bed
- B. Field joint coating
- C. Areas exposed to Ultra Violet light
- D. Mainline coating
Answer: B
NEW QUESTION # 63
The main reason dehumidification is used during coating operations is to
- A. control the environment
- B. allow the contractor to guarantee the completion date.
- C. avoid repetitive blasting/coating operations.
- D. reduce the possibility of missing the recoat window.
Answer: A
NEW QUESTION # 64
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. The same as air blast cleaning
- B. Different than air blast cleaning
- C. Comparable to air blast cleaning
- D. Slightly different to air blast cleaning
Answer: A
NEW QUESTION # 65
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of:
- A. a), b), and c)
- B. Risk of chemical exposure
- C. Risk of acid or caustic splashes
- D. Risk of skin
Answer: A
NEW QUESTION # 66
A reinforced coating is
- A. equally resistant to movement and impact as a non-reinforced coating.
- B. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- C. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. equally resistant to abrasion and impact as a non-reinforced coating.
Answer: C
NEW QUESTION # 67
Linings are used on the interior of pipelines to
- A. protect the transported product.
- B. afford limited temperature insulation.
- C. provide protection against soil chemicals.
- D. reduce magnetic polarity.
Answer: A
NEW QUESTION # 68
Coating application to concrete substrates is:
- A. More challenging than coating steel
- B. The same as coating steel
- C. Less challenging, than coating steel
- D. Not required as Concrete is inorganic
Answer: A
NEW QUESTION # 69
Galvanizing performs best in which of the following exposures:
- A. pH above 12
- B. pH of 13
- C. pH between 5-10
- D. pH below 4
Answer: C
NEW QUESTION # 70
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:
- A. Request clarification from the specifier
- B. Ignore the additional requirement
- C. Enforce the additional requirement
- D. Call your supervisor
Answer: C
NEW QUESTION # 71
All of these are advantages of using repair patches EXCEPT
- A. excellent abrasion resistance.
- B. barrier to moisture and corrosion.
- C. inert to common acids, alkalis, and solvents.
- D. special tools or equipment are required.
Answer: D
NEW QUESTION # 72
A failure caused by applying a coating too thinly is known as
- A. chalking.
- B. failure to cure.
- C. pinholes.
- D. cracking.
Answer: C
NEW QUESTION # 73
......
Get professional help from our NACE-CIP2-001 Dumps PDF: https://www.actual4cert.com/NACE-CIP2-001-real-questions.html
Clear your concepts with NACE-CIP2-001 Questions Before Attempting Real exam: https://drive.google.com/open?id=11vJI00l-OFhvfLExc-jiBKpG2KrEpt0b