300-620 Braindumps Real Exam Updated on Dec 20, 2021 with 113 Questions
Latest 300-620 PDF Dumps & Real Tests Free Updated Today
Cisco 300-620 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| ACI Anywhere | 10% | 1. Describe multipod 2. Describe multisite |
| ACI Fabric Infrastructure | 20% | 1. Describe ACI topology and hardware 2. Describe ACI Object Model 3. Utilize faults, event record, and audit log 4. Describe ACI fabric discovery 5. Implement ACI policies
6. Implement ACI logical constructs
|
| Integrations | 15% | 1. Implement VMware vCenter DVS integration 2. Describe resolution immediacy in VMM 3. Implement service graph (managed and unmanaged) |
| ACI Management | 20% | 1. Implement out-of-band and in-band 2. Utilize syslog and snmp services 3. Implement configuration backup (snapshot/config import export) 4. Implement AAA and RBAC 5. Configure an upgrade |
| ACI Packet Forwarding | 15% | 1. Describe endpoint learning 2. Implement bridge domain configuration **** (unicast routing, Layer 2 unknown hardware proxy, ARP flooding) |
| External Network Connectivity | 20% | 1. Implement Layer 2 out (STP/MCP basics) 2. Implement Layer 3 out (excludes transit routing and VRF route leaking) |
Understanding functional and technical aspects of Implementing Cisco Application Centric Infrastructure (300-620 DCACI) Security Policies and Procedures
The following will be discussed in CISCO 300-620 exam dumps:
Customers changing application requirements need a flexible approach that is simple, more agile, and application-centric. Ease of provisioning and speed are critical performance metrics for data center network infrastructure that support physical, virtual, and cloud environmentsâÂÂwithout compromising scalability or security.
Cisco Application Centric Infrastructure (Cisco ACI) is a comprehensive software-defined networking (SDN) architecture. This solution provides a network that is deployed, monitored, and managed in an application-centric way. It uses business-relevant language that benefits different teams working with and within the IT organization.
- Configure an upgrade
- Distributed Virtual Switch (DVS)
- Configure External Layer 3 (L3Out) Connection
- Enable Inter-EPG Layer 3 Connectivity
- Utilize syslog and snmp services
- Enable Layer 2 Connectivity in the Same Endpoint Group (EPG)
- Implement configuration backup (snapshot/config import export)
- Configure External Layer 2 (L2Out) Connection
- Compare Traffic Forwarding Methods in a Bridge Domain
- Implement AAA and RBAC
- Configure Network Time Protocol (NTP)
- Integrate Application Policy Infrastructure Controller (APIC) With VMware vCenter Using VMware
- Validate Fabric Discovery
- Create Access Policies and Virtual Port Channel (vPC)
- Enable Inter-EPG Layer 2 Connectivity
- Implement out-of-band and in-band
Target Audience and Required Skills
300-620 DCACI is a professional-level exam majorly designed for field engineers, network designers and engineers, data center engineers, storage administrators, technical solutions architects, and other personnel who wants to validate their competence in this field. No strict prerequisites are set by Cisco, so the candidates only need to master the topics mentioned in the official outline.
Thus, applicants should have an in-depth understanding of different network protocols, routing and switching, as well as have to be familiar with switching products offered by Cisco Ethernet. Awareness of the basics of virtualization and data center architecture is also recommended. There is a training course by Cisco, which is Understanding Cisco Data Center Foundations (DCFNDU), that may help to grasp all the important information.
NEW QUESTION 27
Which two dynamic routing protocols are supported when using Cisco ACI to connect to an external Layer 3 network? (Choose two.)
- A. eBGP
- B. RIPv2
- C. iBGP
- D. VXLAN
- E. IS-IS
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html
NEW QUESTION 28
An engineer configured Layer 2 extension from the ACI fabric and changed the Layer 2 unknown unicast policy from Flood to Hardware Proxy. How does this change affect the flooding of the L2 unknown unicast traffic?
- A. It is dropped by the leaf when the destination endpoint is not present in the endpoint table.
- B. It is forwarded to one of the spines to perform as a spine proxy.
- C. It is forwarded to one of the APICs to perform as a proxy.
- D. It is flooded within the whole fabric.
Answer: B
NEW QUESTION 29
A RADIUS user resolves its role via the Cisco AV Pair. What object does the Cisco AV Pair resolve to?
- A. security domain
- B. primary Cisco APIC
- C. tenant
- D. managed object class
Answer: D
NEW QUESTION 30
What are two requirements for the IPN network when implementing a Multi-Pod ACI fabric? (Choose two.)
- A. BGP routing
- B. OSPF routing
- C. EIGRP routing
- D. PIM ASM multicast routing
- E. VLAN ID 4
Answer: B,E
NEW QUESTION 31 
Refer to the exhibit. Which two components should be configured as route reflectors in the ACI fabric?
(Choose two.)
- A. apic2
- B. Spine2
- C. Spine1
- D. Leaf2
- E. apic1
- F. Leaf1
Answer: B,C
Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference:
NEW QUESTION 32
What must be configured to redistribute externally learned OSPF routes within the ACI fabric?
- A. Route Control Profile
- B. BGP Route Reflector
- C. PIM Sparse Mode
- D. BGP Inter-leak Route Map
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html
NEW QUESTION 33
Which tenant is used when configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?
- A. common
- B. default
- C. mgmt
- D. infra
Answer: D
NEW QUESTION 34
Refer to the exhibit.
A client reports that the ACI domain connectivity to the fiber channel storage is experiencing a B2B credit oversubscription. The environment has a SYSLOG server for state collection messages. Which value should be chosen to clear the critical fault?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 35 
Refer to the exhibit. An engineer is implementing Cisco ACI - VMware vCenter integration for a blade server that lacks support of bonding. Which port channel mode results in "route based on originating virtual port" on the VMware VDS?
- A. LACP Passive
- B. MAC Pinning-Physical-NIC-load
- C. Static Channel - Mode On
- D. MAC Pinning+
- E. LACP Active
Answer: D
Explanation:
Section: Integrations
NEW QUESTION 36
Which endpoint learning operation is completed on the egress leaf switch when traffic is received from an L3Out?
- A. No source MAC or IP address of the traffic is learned as a remote endpoint.
- B. The source IP address of the traffic is learned as a remote endpoint.
- C. The source MAC address of the traffic is learned as a remote endpoint.
- D. The source MAC and IP address of the traffic is learned as a local endpoint.
Answer: B
NEW QUESTION 37
Which components must be configured for the BGP Route Reflector policy to take effect?
- A. spine fabric interface overrides and profiles
- B. pod policy groups and profiles
- C. leaf fabric interface overrides and profiles
- D. access policies and profiles
Answer: A
Explanation:
Section: ACI Fabric Infrastructure
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/L3-configuration/Cisco- APIC-Layer-3-Networking-Configuration-Guide-401/Cisco-APIC-Layer-3-Networking-Configuration-Guide-
401_chapter_01.html
NEW QUESTION 38
An engineer must advertise a selection of external networks learned from a BGP neighbor into the ACI fabric. Which L3Out subnet configuration option creates an inbound route map for route filtering?
- A. External Subnets for the External EPG
- B. Shared Route Control Subnet
- C. Shared Security Import Subnet
- D. Import Route Control Subnet
Answer: D
NEW QUESTION 39
Which setting prevents the learning of Endpoint IP addresses whose subnet does not match the bridge domain subnet?
- A. "Limit IP learning to network" setting within the bridge domain.
- B. "Limit IP learning to subnet" setting within the EPG.
- C. "Limit IP learning to subnet" setting within the bridge domain.
- D. "Limit IP learning to network" setting within the EPG.
Answer: C
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/ b_Cisco_APIC_Layer_2_Configuration_Guide/ b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html
NEW QUESTION 40
An engineer is implementing a connection that represents an external bridged network. Which two configurations are used? (Choose two.)
- A. Layers 2 internal
- B. Layer 2 remote fabric
- C. Static path binding
- D. VXLAN outside
- E. Layer 2 outside
Answer: C,E
NEW QUESTION 41
Refer to the exhibit.
Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)
- A. apic2
- B. Spine2
- C. Spine1
- D. Leaf2
- E. apic1
- F. Leaf1
Answer: B,C
NEW QUESTION 42
An application team tells the Cisco ACI network administrator that it wants to monitor the statistics of the unicast and BUM traffic that are seen in a certain EPG. Which statement describes the collection statistics?
- A. The collection of statistics is enabled on the EPG level by enabling the statistics for unicast and BUM traffic.
- B. All EPGs in the Cisco ACI tenant object must be enabled for statistics to be collected.
- C. EPG statistics can be collected only for VMM domains. If a physical domain exists, statistics are not collected.
- D. Cisco ACI does not capture statistics at the EPG level. Only statistics that pass through ACI contracts can be monitored.
Answer: B
NEW QUESTION 43
When configuring Cisco ACI VMM domain integration with VMware vCenter, which object is created in vCenter?
- A. VMware vSphere Standard vSwitch
- B. VMware vSphere Distributed Switch
- C. cluster
- D. datacenter
Answer: B
Explanation:
Section: Integrations
NEW QUESTION 44
A network engineer demonstrates Cisco ACI to a customer. One of the test cases is to validate a disaster recovery event by resetting the ACI fabric to factory and then restoring the fabric to the state it was in before the event. Which setting must be enabled on ACI to export all configuration parameters that are necessary to meet these requirements?
- A. encrypted export destination
- B. enabled JSON format export
- C. enabled AES encryption
- D. generated a tech-support file
Answer: C
NEW QUESTION 45
Which table holds IP address, MAC address and VXLAN/VLAN information on a Cisco ACI leaf?
- A. adjacency
- B. endpoint
- C. ARP
- D. RIB
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739989.html
NEW QUESTION 46
Which feature dynamically assigns or modifies the EPG association of virtual machines based on their attributes?
- A. vzAny contracts
- B. application EPGs
- C. uSeg EPGs
- D. standard contracts
Answer: C
NEW QUESTION 47
......
300-620 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.actual4cert.com/300-620-real-questions.html
Pass Cisco 300-620 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=1ONwyYpNmCCNRebqGq5QTLThpvQmZolPx