500-220 Dumps - Grab Out For [NEW-2023] Cisco Exam
500-220 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 30
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Selective wipe
- B. Remote Desktop
- C. Screenshot
- D. Send notification
- E. OS updates
Answer: A,B
NEW QUESTION 31
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
NEW QUESTION 32
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
- A. intrusion prevention
- B. SD-WAN
- C. malware protection
- D. next-generation firewall
Answer: D
NEW QUESTION 33
What happens to an unsupervised iOS device when the "Meraki management" profile is removed?
- A. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed are also removed.
- B. The "Meraki management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed remain.
- D. The "Meraki management" profile cannot be removed.
Answer: A
NEW QUESTION 34
Refer to the exhibit.
During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
- A. An AP cannot connect to the default gateway.
- B. An AP does not have a wired connection to the network.
- C. An AP has Site Survey mode enabled.
- D. An AP has never connected to the Meraki Cloud Controller.
Answer: D
Explanation:
Reference:
Troubleshooting_local_connection_issues_using_default_SSID_on_MR_Access_Points
NEW QUESTION 35
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. lowest VLAN ID that is configured and set to YES to use VPN
- B. lowest VLAN ID configured and set to NO to use VPN
- C. highest VLAN ID that is configured and set to YES to use VPN
- D. highest VLAN ID that is configured and set to NO to use VPN
Answer: C
Explanation:
Reference:
Using_the_Ping_Live_Tool
NEW QUESTION 36
How is high-availability supported for Cisco Meraki devices?
- A. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
- B. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
- C. An active/active high-availability pair is recommended for MX Security Appliances.
- D. Only the MX Security Appliances that use VRRP support high availability.
Answer: D
Explanation:
Reference:
_High_Availability_Pair
NEW QUESTION 37
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device stops passing traffic.
- B. The offline device tries to form a connection with a local backup sever.
- C. The offline device continues to run with its last known configuration until cloud connectivity is restored.
- D. The offline device reboots every 5 minutes until connection is restored.
Answer: B
NEW QUESTION 38
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. Content filtering
- B. Bridge mode
- C. Dual band operating with Band Steering
- D. 802.11r
Answer: C
NEW QUESTION 39
Which requirement is needed to implement Fast Lane on Cisco Meraki APs?
- A. wireless profile installed on an Apple iOS device
- B. traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com
- C. adaptive 802.11r disabled
- D. wireless profile installed on a Cisco iOS access point
Answer: A
Explanation:
Reference:
Wireless_QoS_and_Fast_Lane
NEW QUESTION 40
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients can connect.
- B. Currently associated clients stay connected.
- C. New clients cannot connect.
- D. Currently associated clients are disconnected.
- E. Currently associated clients are affected by restrictive traffic shaping rules.
Answer: C,D
NEW QUESTION 41
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs data encryption for inter-VLAN traffic.
- B. The MX appliance performs AMP for inter-VLAN traffic.
- C. The MX appliance performs content filtering for inter-VLAN traffic.
- D. The MX appliance performs IDS/IPS for inter-VLAN traffic.
Answer: A
NEW QUESTION 42
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- B. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- C. WebEx traffic will prefer WAN 2 as long as it is up.
- D. WebEx traffic will be load-balanced between both active WAN links.
Answer: A
NEW QUESTION 43
Refer to the exhibit.
Which outcome occurs when logging is set to Enabled?
- A. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
- B. The hits counter within this section is now enabled.
- C. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.
- D. This firewall rule is now enabled.
Answer: C
NEW QUESTION 44
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION 45
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use UDP ports 500 and 4500.
- B. Peers contact the VPN registry at UDP port 9350.
- C. Peers contact the VPN registry at TCP port 9350.
- D. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- E. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
Answer: B,E
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION 46
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
- D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
Answer: D
NEW QUESTION 47
......
Get New 500-220 Certification Practice Test Questions Exam Dumps: https://www.actual4cert.com/500-220-real-questions.html
Pass 500-220 Exam - Real Test Engine PDF with 58 Questions: https://drive.google.com/open?id=1zlEuXdhorXLspTqvovygBHEeXb_R6jjm