Actual4Cert 300-715 dumps & CCNP Security Sure Practice with 153 Questions
New 300-715 Exam Questions| Real 300-715 Dumps
What Topics Does 300-715 SISE Gauge?
This test will address a range of areas related to IT such as:
- BYOD — in this part, applicants will have to explain the different features of Cisco BYOD including BYOD flow, solution tools, requirements, and cases for use, incorporate wireless LAN controllers & switches alongside internal CA to set up BYOD device on-boarding, change whitelists & blacklists, and adjust certificates for BYOD.
- Guest Services & Web Auth — in this domain, students will have to set up guest access services, set up web authentication, configure guest portals, and tweak sponsors.
- Profiler — for this portion, candidates must show that they can deploy probes, install profiler services, incorporate CoA, and lastly, set up endpoint identity management.
- Device Administration & Network Access — for this final domain, candidates must demonstrate they have the ability to set up command authorization, set up TACACS+ device administration alongside contrast AAA protocols.
- Endpoint Agreements — in such a section, examinees will have to show they can explain posture services, elaborate endpoint agreements, describe client provisioning, set up client provisioning, posture conditions, function modes, and ISE posture agents, explain IT elements such as servers, authenticators, and supplicants, and lastly, adjust the agreement module.
- Deployment & Architecture — here, students must show that they can explain the different types of deployment approaches available and tweak personas.
- Policy Execution — under such a category, candidates need to demonstrate they can set up LDAP and native AD, elaborate on the numerous options of identity storage available such as OTP, AD, PKI, LDAP, Local, Smart Card, set up 802.1X phasing deployment by using minimum impact, monitor form, and closed form, set up devices that can access the network, deploy MABs, adjust CiscoTrustSec, change authorization profiles, adjust authentication policies, and finally, adjust network access for both wireless and wired 802.1X.
Certification Path for Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)
This exam will help you use SISE to:
- Centrally configure and manage profiler, posture, guest, authentication, and authorization services in a single web-based GUI console
- Gain leading-edge career skills for high-demand job roles and responsibilities focused on enterprise security
- Earn 40 CE credits toward recertification
- Provide secure business and context-based access based on policies
- Provide a streamlined experience for implementing and customizing guest network access
It has no pre-requisite.
NEW QUESTION 55
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 56
Which personas can a Cisco ISE node assume'?
- A. policy service, gatekeeping, and monitoring
- B. administration, policy service, and monitoring
- C. administration, policy service, gatekeeping
- D. administration, monitoring, and gatekeeping
Answer: B
Explanation:
Reference:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html The persona or personas of a node determine the services provided by a node. An ISE node can assume any or all of the following personas: Administration, Policy Service, and Monitoring. The menu options that are available through the administrative user interface are dependent on the role and personas that an ISE node assumes. See Cisco ISE Nodes and Available Menu Options for more information.
NEW QUESTION 57
In a Cisco ISE split deployment model, which load is split between the nodes?
- A. log collection
- B. device admission
- C. network admission
- D. AAA
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/install_guide/b_ise_InstallationGuide26.pdf
NEW QUESTION 58
What must be configured on the WLC to configure Central Web Authentication using Cisco ISE and a WLC?
- A. Set the NAC State option to RADIUS NAC.
- B. Use the radius-server vsa send authentication command.
- C. Set the NAC State option to SNMP NAC.
- D. Use the ip access-group webauth in command.
Answer: B
NEW QUESTION 59
Refer to the exhibit.
Which component must be configured to apply the SGACL?
- A. egress router
- B. host
- C. secure server
- D. ingress router
Answer: A
NEW QUESTION 60
How is policy services node redundancy achieved in a deployment?
- A. by creating a node group
- B. by enabling VIP
- C. by utilizing RADIUS server list on the NAD
- D. by deploying both primary and secondary node
Answer: D
NEW QUESTION 61
What is the deployment mode when two Cisco ISE nodes are configured in an environment?
- A. standalone
- B. active
- C. distributed
- D. standard
Answer: C
NEW QUESTION 62
Which two components are required for creating a Native Supplicant Profile within a BYOD flow? (Choose two.)
- A. Windows Settings
- B. iOS Settings
- C. Redirect ACL
- D. Connection Type
- E. Operating System
Answer: B,E
Explanation:
Section: BYOD
NEW QUESTION 63
Which two events trigger a CoA for an endpoint when CoA is enabled globally for ReAuth? (Choose two.)
- A. addition of endpoint to My Devices Portal
- B. endpoint profile transition from Aop.e-dev.ee to Apple-iPhone
- C. endpoint profile transition from Unknown to Windows 10-Workstation
- D. updating of endpoint dACL.
- E. endpoint marked as lost in My Devices Portal
Answer: B,C
NEW QUESTION 64
What is a requirement for Feed Service to work?
- A. Cisco ISE has Internet access to download feed update.
- B. TCP port 8080 must be opened between Cisco ISE and the feed server.
- C. Cisco ISE has a base license.
- D. Cisco ISE has access to an internal server to download feed update.
Answer: D
Explanation:
Section: Architecture and Deployment
NEW QUESTION 65
Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.
Answer:
Explanation:
NEW QUESTION 66
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?
- A. BYOD
- B. Client provisioning
- C. My devices
- D. MDM
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01111.html
NEW QUESTION 67
Refer to the exhibit. Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication registrations
- B. show authentication sessions method
- C. show authentication interface gigabitethemet2/0/36
- D. show authentication sessions mac 000e.84af.59af details
Answer: D
NEW QUESTION 68
Refer to the exhibit.
A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)
- A. ip device tracking
- B. aaa authorization auth-proxy default group radius
- C. radius-server attribute 8 include-in-access-req
- D. radius server vsa sand authentication
- E. dot1x system-auth-control
Answer: C,D
NEW QUESTION 69
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two.)
- A. BYOD
- B. hotspot
- C. new AD user 802 1X authentication
- D. posture
- E. guest AUP
Answer: C,D
NEW QUESTION 70
Which two fields are available when creating an endpoint on the context visibility page of Cisco IS? (Choose two )
- A. IP Address
- B. Policy Assignment
- C. Identity Group Assignment
- D. Endpoint Family
- E. Security Group Tag
Answer: B,D
NEW QUESTION 71
Drag and Drop Question
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_011.html Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 72
......
300-715 Braindumps – 300-715 Questions to Get Better Grades: https://www.actual4cert.com/300-715-real-questions.html
Get New 300-715 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1bzXOu-8BgWU7nP22CiyexatCb8FZltIp