[Aug-2023] HP HPE0-J68 Test Engine PDF - All Free Dumps from Actual4Cert
Get New HPE0-J68 Certification – Valid Exam Dumps Questions
HPE0-J68 exam is an essential certification for IT professionals who specialize in storage solutions. Passing the exam demonstrates a candidate's knowledge and skills in designing, implementing, and managing storage solutions using HPE products and technologies. To prepare for the exam, candidates can take advantage of various training courses, study guides, practice exams, and online forums.
HPE0-J68 exam is a multiple-choice exam consisting of 60 questions. HPE0-J68 exam is timed, and candidates have 90 minutes to complete it. The questions in the exam are designed to test the candidate's knowledge and understanding of HPE storage solutions. HPE0-J68 exam is conducted online and can be taken from anywhere in the world.
NEW QUESTION # 90
A customer need to update the local sever at each of their branches keep up with the increasing demand for High-performance storage. The customer cannot afford to move to SAN at each state. Which HPE storage technology can increase performance for this customer?
- A. SmartCache
- B. Smart Path
- C. Adaptive Flash Cache
- D. Persistent Cache
Answer: A
NEW QUESTION # 91
What is the typical protocol used to access data from object storage?
- A. HTTP
- B. FC
- C. iSCSI
- D. NVMe
Answer: B
NEW QUESTION # 92
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?
- A. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
- B. A maximum of two switches can be used in an IRF stack when connecting storage.
- C. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
- D. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
Answer: B
NEW QUESTION # 93
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?
- A. Zones can be configured for QoS with high ,medium, and low priorities within a fabric on a zone by zone basic
- B. In-flight compression and encryption provides efficient link utilization and security
- C. Support for six Ethernet and two fibre channel ,or six Ethernet and two ISCSI or eight Ethernet adapters per server.
- D. Support for combining multiple physical switches in to one virtual switch with a single IP address
Answer: D
NEW QUESTION # 94
What is the benefits of HPE synergy(Select 2)
- A. It can present block storage services from HPE 3par as part of the resource pool
- B. It support up to 3 HPE store Virtual VSA nodes for storage RAID
- C. It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)
- D. It can compose and reclaim DAS storage
- E. It can use HPE 3PAR file persona for objet storage
Answer: A,D
NEW QUESTION # 95
Exhibit:
Which fabric design is shown?
- A. single fabric
- B. core-edge
- C. meshed
- D. cascaded
Answer: C
NEW QUESTION # 96
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. FL_PORT (WRONG)
- B. N_PORT
- C. F_PORT
- D. E_PORT (Correct)
Answer: D
NEW QUESTION # 97
You are designing a solution that will have a new HPE Synergy frame and an HPE 3PAR StoreServ 8200 storage array with only the built-in ports. This new environment must keep the infrastructure within the data center to a minimum.
Which interconnect module will achieve this goal?
- A. Virtual Connect SE 40Gb F8 Module
- B. Synergy 25-50Gb F8 Switch Module
- C. 6125G/XG Ethernet Blade Switch
- D. Synergy 20Gb Interconnect Link Module
Answer: A
NEW QUESTION # 98
A customer is deploying a new StoreOnce VSA solution.
How can the necessary storage capacity be added to the VSA? (Choose two.)
- A. Verify sufficient capacity LTUs are available
- B. Add a new virtual hard disk to the virtual machine
- C. The Cloud bank container needs to be configured once the VSA boots
- D. The Cloud bank container needs to be configured from the vCenter client
Answer: B,D
NEW QUESTION # 99
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?
- A. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.
- B. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
- C. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
- D. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
Answer: B
NEW QUESTION # 100
Which statement describes HPE StoreVirtual Network RAID functionality?
- A. Redundancy is managed on a per-volume basis.
- B. Volumes remain available if an odd number of nodes are available.
- C. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
- D. Network RAID 10 requires an even number of storage nodes.
Answer: A
Explanation:
Redundancy is managed on a per volume basis to improve storage utilization and to remove any simgle point of failure.
NEW QUESTION # 101
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?
- A. Dynamic Optimization
- B. Peer Motion
- C. virtual Copy
- D. Network RAID
Answer: B
NEW QUESTION # 102
A customer migrate their infrastructure from a 3rd party storage to a Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMVision?
- A. SNMP trap service has to be configured to send traps to infosight and integrate performance data using VMvision.
- B. VMware vSphere storage API's array integration (VAAI)has to be configured to combine storage and VM performance metrics
- C. Nibmle service processor collects relevant per VM performance data and send them using SSL port 443 to VMvision
- D. VMvision is an agentless integration into infosight and needs only the Vcenter server appliance credentials to connect. (page 112)
Answer: B
NEW QUESTION # 103
You want to deploy Recovery Manager Central to a customer environment.
How can you accomplish this? (Choose two.)
- A. Install RMC on the top of the virtual or physical RHEL system using the CLI
- B. Deploy an RMC virtual appliance to Microsoft Hyper-V hypervisor
- C. Deploy RMC on top of the virtual CentOS system using the CLI
- D. Install RMC on top of the virtual or physical RHEL system using the GUI wizard
- E. Deploy RMC on top of the virtual CentOS system using the GUI wizard
- F. Deploy an RMC virtual appliance to VMware ESXi hypervisor
Answer: B,F
NEW QUESTION # 104
You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.
Which HPE tool can you use on the host server to make the integration easier?
- A. Connection Manager
- B. StorServe Management Console
- C. Centralized Management Console
- D. Channel bonding
Answer: A
NEW QUESTION # 105
Which storage principle would benefits of customer who has several departments in their organization with different storage needs?
- A. Federated storage
- B. Scale out storage
- C. Autonomic Management
- D. Multi-tenancy
Answer: D
NEW QUESTION # 106
Which protocol can be used for accessing StoreOnce VTL target from Veeam?
- A. iSCSI
- B. FC
- C. NFSv4
- D. SMBv3
Answer: A
NEW QUESTION # 107
A large organization is experiencing exponential data growth of object storage due to recent mergers and acquisition .They need an on-premise solution to optimize cost at petabyte scale Which components should you recommend for a software-defined solution ?(select two)
- A. HPE 3PAR Storeserv 9450c
- B. HPE Appolo 4510 server
- C. HPE Complete -Scalability RING
- D. HPE complete -CTERA
- E. HPE Synergy 660 Gen10 compute modules
Answer: B,C
NEW QUESTION # 108
A customer environment includes:
10 DL380 Gen8 servers in a VMware Cluster
2 MSA storage arrays
2 8GB b-series fibre channel switches
The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.
Which HPE Storage should you recommend?
- A. HPE StoreOnce
- B. HPE Nimble dHCI
- C. HPE Primera
- D. HPE XP8
Answer: C
NEW QUESTION # 109
......
100% Passing Guarantee - Brilliant HPE0-J68 Exam Questions PDF: https://www.actual4cert.com/HPE0-J68-real-questions.html
HPE0-J68 Dumps 2023 - NewHP Exam Questions: https://drive.google.com/open?id=1Sgu6BHmucLn3EzUCAuVctwrVaQ5Ss3ij