CWT-101 Exam Dumps - PDF Questions and Testing Engine [Q76-Q92]

Share

CWT-101 Exam Dumps - PDF Questions and Testing Engine

CWT-101 Dumps - The Sure Way To Pass Exam

NEW QUESTION # 76
Which feature of an 802.11 AP allows separate wireless networks to be established for guest access?

  • A. Multiple-SSID support
  • B. Guest access
  • C. Single-band vs. dual-band
  • D. PHY and frequency band support

Answer: B


NEW QUESTION # 77
What are some common causes of connectivity problems in wireless networks?

  • A. Feature incompatibility
  • B. Low data rates
  • C. Configuration errors
  • D. Driver issues

Answer: C


NEW QUESTION # 78
Which tool can be used to detect and analyze RF signals?

  • A. Wavelength meter
  • B. Amplitude scanner
  • C. Wireless scanner tools
  • D. Phase detector

Answer: C


NEW QUESTION # 79
You have five APs and each AP has an average of 63 connected and active clients an any given moment. Many users complain that throughput is poor on the WLAN.
You use only channels 1, 6 and 11 in 2.4 GHz on these APs and have configured them with a staggered channel plan. You are not using the 5 GHz radios available in the APs.
What action would have the most significant positive impact on performance?

  • A. Install two more APs in the 2.4 GHz frequency band
  • B. Change the channels to 3 and 7 on two of the APs
  • C. Enable the 5 GHz radios on all five APs
  • D. Increase the output power on all five APs

Answer: C


NEW QUESTION # 80
What is the term used to describe the interference caused when multiple devices compete for the same channel in RF communication?

  • A. Co-Channel Interference (CCI)
  • B. Antenna cables and connectors
  • C. Co-Channel Contention (CCC)
  • D. Antenna pattern charts

Answer: C


NEW QUESTION # 81
What is the term used to describe the minimum signal strength required by a device to successfully receive wireless communication?

  • A. Receive sensitivity
  • B. Supported channels
  • C. Transmit power
  • D. Channel widths

Answer: A


NEW QUESTION # 82
A user reports sporadic performance problems with the WLAN. She works near the company lunch room, which has typical kitchen equipment. The problems seem to be worse during the lunch hour.
What is the likely case?

  • A. Improper roaming settings
  • B. RF interference
  • C. Improper band preference settings
  • D. Improper security settings

Answer: B


NEW QUESTION # 83
What best describes passive scanning used to locate WLANs?

  • A. Scanning in only on frequency band
  • B. Scanning on only one channel
  • C. Sending probe requests and listening for probe responses
  • D. Listening for beacon frames from the APs

Answer: D


NEW QUESTION # 84
What is defined as the bending of an RF wave as it passes through a medium?

  • A. Refraction
  • B. Absorption
  • C. Scattering
  • D. Reflection

Answer: A


NEW QUESTION # 85
Which component of a wireless device needs to be configured for optimum performance, such as band preference and regulatory domain?

  • A. Supported channels
  • B. Client drivers
  • C. Transmit power
  • D. Channel widths

Answer: B


NEW QUESTION # 86
Which operating system is commonly used on Google's Chromebook devices?

  • A. macOS
  • B. Chrome OS
  • C. Linux
  • D. Windows

Answer: B


NEW QUESTION # 87
What is the term used to describe the decrease in signal strength as an RF signal propagates through space?

  • A. Free space path loss
  • B. Reflection
  • C. Refraction
  • D. Gain and loss

Answer: A


NEW QUESTION # 88
What is one possible cause of security problems in a wireless network if the EAP method used by the client is not supported by the access point?

  • A. Incorrect network keys
  • B. Incorrect passphrases
  • C. Incompatible EAP methods
  • D. Configuration errors

Answer: C


NEW QUESTION # 89
What is one possible cause of mobility problems in a wireless network if the fast roaming method used by the client is not supported by the access point?

  • A. Non-implemented roaming features
  • B. Unsupported fast roaming methods
  • C. Improper network settings
  • D. Configuration errors

Answer: B


NEW QUESTION # 90
What does dual-band refer to in the context of an 802.11 AP?

  • A. Ability to operate in two operational modes
  • B. Support for two simultaneous wireless connections
  • C. Support for two different frequency bands
  • D. Multiple-SSID support for guest access

Answer: C


NEW QUESTION # 91
You are receiving reports from several users that their clients connect with very low data rates. All reports are confined to a particular area in the facility and the users report that the problem does not occur with the same devices in other areas.
What is most likely problem in that area?

  • A. Improper client security configuration
  • B. Improper AP security configuration
  • C. Poor signal strength
  • D. High SNR

Answer: C


NEW QUESTION # 92
......

Pass CWNP CWT-101 Exam Quickly With Actual4Cert: https://www.actual4cert.com/CWT-101-real-questions.html

CWT-101 Exam Questions (Updated 2024) 100% Real Question Answers: https://drive.google.com/open?id=1w9XNB46KJrsgzuyQymuuU45psKg7BN8_