Excellent OmniStudio-Developer Updated 2021 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Salesforce OmniStudio-Developer
NEW QUESTION 37
in an OmniScript, you need to get data from a single field ina Salesforce record.
What element does this?
- A. HTTP Action
- B. Lookup
- C. DataRaptor Post Action
- D. Select
Answer: B
NEW QUESTION 38
In an Integration Procedure, you need to perform a multi-step calculation on every element of an array. Based on best practices, what two methods are recommended? Choose 2 answers
- A. Use a Matrix Action to call a Calculation Matrix
- B. Use a List Action to merge the array elements together.
- C. Use a Calculation Action to call a Calculation Procedure.
- D. Use a Set Values Element inside a Loop Block.
Answer: A,C
NEW QUESTION 39
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId.The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- B. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additionalinput:
- C. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- D. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
Answer: D
NEW QUESTION 40
What part of a DataRaptor Extract defines the JSON that is shared with Viocity apps?
- A. Expected Output
- B. Extract JSON Path
- C. Output JSON Path
- D. Preview Response
Answer: C
NEW QUESTION 41
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat a. What error could cause this behavior?
Choose 2 answers
- A. ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor
- B. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
- C. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
- D. The fields that are not updated are read only in Salesforce.
Answer: C,D
NEW QUESTION 42
An OmniScript saves data to Salesforce and to an AWS Order Management system.
What OmniScript element could save all of this data?
- A. HTTP Action
- B. DataRaptor Load Action
- C. Integration Procedure Action
- D. DataRaptor Post Action
Answer: C
NEW QUESTION 43
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?
- A. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
- B. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.
- C. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
- D. The state sequenced first in the FlexCard canvas will display.
Answer: D
NEW QUESTION 44
Users receive an APEC CPU limit Exceeded error when running an OmniScript in a Salesfoce Community. The OmniScript includes an Integration Procedure that contains two DataRaptors.
Which two Location should the developer check to troubleshoot the issue?
Choose 2 answers
- A. Community logs
- B. DataRaptor configuration
- C. Action Debugger
- D. Script configuration
Answer: B,C
NEW QUESTION 45
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developerconfigure the FlexCard to display the case records in this way?
- A. Select the Repeatable Mode property on the data table elements
- B. Enable the Repeat Records feature on the FlexCard Setup tab
- C. Enable the record Looping feature on the data table elements
- D. Disable the Repeat Record feature on the FlexCard setup tab
Answer: D
NEW QUESTION 46
A developer needs to build a DataRaptor Transform to send current weatherto both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 47
When an OmniScript is launched from an Action on a FlexCard, the OmniScript displays, but no Salesforce data is populated.
What error could cause this behavior? Choose 2 answers
- A. In the DataRaptor Extract Action, the Input Parameters Data Source is misspelled.
- B. There is no active version of the OmniScript.
- C. There is no active version of the DataRaptor Extract.
- D. The Id Field for Actions in the FlexCard is not configured with the correct Recordid.
Answer: A,D
NEW QUESTION 48
You configured a FlexCard with a DataRaptor data source which uses the params.id as an input. When you click View Data on the FlexCard, valid data displays. However, when you preview the layout, the FlexCard does not display.
What could cause this error? Choose 2 answers
- A. The Recordid in the Test Data Source Settings is for the wrong record type.
- B. The Attributes haven't been configured to pass the data to the fields.
- C. There is no Salesforce record for the FlexCard based on the Recordid in the layout's Test Data Source Settings.
- D. The Data Node field for the FlexCard is empty.
Answer: A,C
NEW QUESTION 49
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?
- A. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
- B. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
- C. Add a navigation Action inside each step and set the Element Name to ''Cancel'',
- D. Add a navigation Action inside each step and set the Component name to ''Cancel'',
Answer: A
NEW QUESTION 50
A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?
- A. ResponseCart
- B. ResponseCartDebug
- C. Response
- D. FetchCart
Answer: B
NEW QUESTION 51
What two advantages does a DataRaptor Turbo Extract have over a standard DataRaptor Extract? Choose 2 answers
- A. It is easier to configure
- B. It has better performance at runtime
- C. It supports complex field mappings
- D. It populates data in PDF and DocuSign format
Answer: B,C
NEW QUESTION 52
A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Deactivate the contextId key/value pair
- B. Add a Show/Hide condition on the Set Values element.
- C. Update the ContextId value to specify an id from the Production org.
- D. Delete or Deactivate the Set Values element.
Answer: B
NEW QUESTION 53
Which of these checkboxes helps prevent a DataRaptor Load from creating duplicate records?
- A. Upsert Key
- B. Is Lookup
- C. s Disabled
- D. Is Required For Upsert
Answer: A
NEW QUESTION 54
Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 55
What can be launched with an action button on a FlexCard?
- A. A Viocity Calculation Matrix
- B. A Vlocity Calculation Procedure
- C. AViocity DataRaptor Load
- D. A Viocity omniscript
Answer: D
NEW QUESTION 56
A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Parent.postalcode}
- B. {Postalcode}
- C. {Records.postalcode}
- D. {Params.postalcode}
Answer: D
NEW QUESTION 57
A developer needs to display read-only contact information in a OmniScript. The developer will format the information as a table, using merge codes to dynamically include first name, last name, street address, state, postal, code, and country from the data JSON.
Which OmniScript element should the developer use to meet this requirement?
- A. Edit Block
- B. Text area
- C. Text Block
- D. Rich text Area
Answer: C
NEW QUESTION 58
In an OmniScript, you have a Disclosure element that requires user input only if the user already checked a Non Disclosure Agreement checkbox.
Which conditional view option do you choose?
- A. Disable read only if true
- B. Set element to required if true
- C. Set element to optional if false
- D. Show element if true
Answer: D
NEW QUESTION 59
A developer needs to create . DataRaptor to retrieve the name of an account for a contact.
Following best practices, how should a developer configure the extraction steps?
- A. Define an extraction step for the Account object, and set the Extract JSON Path to AccountContact.Name
- B. Define an extraction step for the Contact object and set the Extract JSON Path to Contact Account.Name
- C. Define extraction steps for the Contact and the Account objects, and set the Extract JSON Path to Contact Account.Name
- D. Define extraction steps for the Contact and the Account objects, and set the Extract 3SON Path to Account.Name
Answer: B
NEW QUESTION 60
......
Salesforce Certified OmniStudio Developer Certification Sample Questions and Practice Exam: https://www.actual4cert.com/OmniStudio-Developer-real-questions.html
Real Exam Questions & Answers - Salesforce OmniStudio-Developer Dump is Ready: https://drive.google.com/open?id=1wlUQUNthJpG7Vm3zEG_bpQXoXQInJXoU