Free Cisco 300-430 Exam Questions & Answer from Training Expert Actual4Cert [Q119-Q135]

Share

Free Cisco 300-430 Exam Questions and Answer from Training Expert Actual4Cert

Top Cisco 300-430 Courses Online

NEW QUESTION # 119
A FlexConnect remote office deployment is using five 2702i APs indoors and two 1532i APs outdoors. When a code upgrade is performed and FlexConnect Smart AP Image Upgrade is leveraged, but no FlexConnect Master AP has been configured, how many image transfers between the WLC and APs will occur?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 120
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

  • A. X, Y real location
  • B. WLC IP address
  • C. AP name
  • D. client MAC address
  • E. client description

Answer: A,D

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/88/b_ap_4800_hyperlocation_deployment_g


NEW QUESTION # 121
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24. Which entry does the engineer define in the RADIUS server?

  • A. WLC roles for commands and the network range 192 168 1 0/255 255 255.0
  • B. NAS entry of the virtual interface and the network range 192 168 2 0/255 255 255 0
  • C. administrative access defined on the WLC and the network range 192 168 2 0/255 255 254.0
  • D. shared secret defined on the WLC and the network range 192 168 1 0/255 255 254.0

Answer: B


NEW QUESTION # 122
When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?

  • A. config flexconnect group BranchA-FCG vlan add 30
  • B. config flexconnect BranchA-FCG vlan add 30
  • C. config flexconnect group BranchA-FCG vlan 30 add
  • D. config flexconnect BranchA-FCG vlan 30 add

Answer: A

Explanation:


NEW QUESTION # 123
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?

  • A. triangulation
  • B. received signal strength
  • C. time distance of arrival
  • D. angle of incidence

Answer: D

Explanation:


NEW QUESTION # 124
Which statement about the VideoStream/Multicast Direct feature is true?

  • A. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.
  • B. It converts the unicast frame to a multicast frame over the air.
  • C. Each VideoStream client acknowledges receiving a video IP multicast stream.
  • D. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.

Answer: C

Explanation:


NEW QUESTION # 125
An engineer is troubleshooting rogue access points that are showing up in Cisco Prime Infrastructure.
What is maximum number of APS the engineer can use to contain an identified rogue access point in the WLC?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Enter the maximum number of Cisco APs to actively contain the rogue client [1-4].
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan- controllers/112045-handling-rogue-cuwn-00.html


NEW QUESTION # 126
The security policy mandates that only controller web management traffic is allowed from the IT subnet. In testing, an engineer is trying to connect to a WLAN with Web Authentication for guest users, but the page is timing out on the wireless client browser. What is the cause of the issue?

  • A. The implemented CPU ACL on the controller is blocking HTTP/HTTPS traffic from the guest clients.
  • B. Web Authentication Redirect is not supported with CPU ACLs.
  • C. The DNS server that is configured on the controller is incorrect.
  • D. Web Authentication Redirect is supported only with Internet Explorer, and the client is using Google Chrome.

Answer: A


NEW QUESTION # 127
Refer to the exhibit.

The image shows a packet capture that was taken at the CLI of the Cisco CMX server. It shows UDP traffic from the WLC coming into the server. What does the capture prove?

  • A. The Cisco CMX server receives SNMP traffic from the WLC.
  • B. The Cisco CMX server receives Angle-of-Arrival data from the WLC.
  • C. The Cisco CMX server receives NetFlow data from the WLC.
  • D. The Cisco CMX server receives NMSP traffic from the WLC.

Answer: B

Explanation:
Explanation

https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200907-configuring-and-tro


NEW QUESTION # 128
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?

  • A. Client Exclusion is enabled
  • B. FlexConnect Local Auth is disabled
  • C. 802.11r Fast Transition is enabled
  • D. ISE NAC is enabled

Answer: B

Explanation:


NEW QUESTION # 129
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?

  • A. Create an AVC profile for WebEx
  • B. Change the AVC application WebEx-app-sharing to mark
  • C. Change the WLAN reserved bandwidth for WebEx
  • D. Create an ACL for WebEx

Answer: B

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html


NEW QUESTION # 130
An engineer needs to configure an autonomous AP for 802.Ix authentication. To achieve the highest security an authentication server is used for user authentication During testing, the AP fails to pass the user authentication request to the authentication server. Which two details need to be configured on the AP to allow communicator! between the server and the AP? (Choose two.)

  • A. RADIUS IP address
  • B. Username and password
  • C. PAC encryption key
  • D. Shared secret
  • E. Group name

Answer: A,D


NEW QUESTION # 131
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?

  • A. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
  • B. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
  • C. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
  • D. Configure QoS on the mobile devices that have Jabber installed.

Answer: A

Explanation:

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.html#reference_7B4539C91FBE4639ACF906F6F3931667


NEW QUESTION # 132
Drag and Drop Question
A wireless engineer wants to schedule monthly security reports in Cisco Prime infrastructure.
Drag and drop the report the from the left onto the expected results when the report is generated on the right.

Answer:

Explanation:

Explanation:


NEW QUESTION # 133
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?

  • A. Create multicast groups on the central Layer 3 switch.
  • B. Enable IGMPv3 on the central Layer 3 switch.
  • C. Enable multicast mode on the WLC
  • D. Enable IGMP snooping on the WLC

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS


NEW QUESTION # 134
Which QoS level is recommended for guest services?

  • A. platinum
  • B. bronze
  • C. silver
  • D. gold

Answer: B


NEW QUESTION # 135
......


To prepare for the exam, candidates can take Cisco authorized training courses, study the official Cisco exam guide, and practice with sample exam questions. Cisco also provides online resources such as whitepapers, design guides, and technical documentation to help candidates prepare for the exam. By preparing thoroughly for the exam, candidates can increase their chances of passing the exam on the first attempt.

 

New (2025) Cisco 300-430 Exam Dumps: https://www.actual4cert.com/300-430-real-questions.html

300-430 Practice Dumps - Verified By Actual4Cert Updated 281 Questions: https://drive.google.com/open?id=10L20kAha5_mp_O3KI_UdxjSeURTMTkhM