[Full-Version] 2022 New Actual4Cert NCSC-Level-1 PDF Recently Updated Questions
NCSC-Level-1 Exam with Guarantee Updated 80 Questions
NEW QUESTION 10
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
- A. Use the Foundation VM to upgrade Foundation on all nodes.
- B. Use crash cart and manually upgrade Foundation files on one node.
- C. Use latest version of Foundation to reimage all the nodes.
- D. Use the Foundation Applet to upgrade Foundation on a single node.
Answer: D
NEW QUESTION 11
A customer wants to know the details of network validation testing.
Where can the consultant find this information?
- A. Operations Guides
- B. As-Built Guide
- C. Handover checklist
- D. Test plan
Answer: C
NEW QUESTION 12
A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?
- A. Route based on source MAC hash
- B. Route based on IP hash
- C. Route based on originating port ID
- D. Route based on physical NIC load
Answer: C
NEW QUESTION 13
A customer racks all nodes in the new cluster. The customer does not allow IPv6 for node discovery.
The consultant is not allowed to use the consultant's own flat switch in the customer's environment.
Which step should the consultant take to resolve this issue?
- A. Image each node individually with Foundation VM.
- B. Connect to the top of rack switch and discover the nodes with IPv4.
- C. Open a console to all nodes and statically assign IP addresses.
- D. Bare metal image all nodes with Foundation VM.
Answer: C
NEW QUESTION 14
A consultant deploys a four-node VMware ESXi cluster and vCenter server. An HA/DRS cluster is configured for all four nodes. The customer deploys five new VMs on the cluster.
During the knowledge Transfer, a network cable on one node is removed to demonstrate HA and migration of the VMs to another host. In the HA/DRS cluster settings, the VM Restart Priority for all CVMs is set to Disabled. The customer observes warnings that the CVM on the ejected host is no longer powered on.
Which ESXi HA/DRS cluster setting is missing?
- A. Disable Automation Level on all CVMs.
- B. Disable VM Monitoring on all CVMs.
- C. Enable Host Monitoring.
- D. Enable EVC for the cluster.
Answer: A
NEW QUESTION 15
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Ensure the vNIC is set to bridged adapter.
- B. Open terminal and configure via ifconfig command.
- C. Run the set_foundation_ip_address application on the VM desktop.
- D. Configure the static IP address through the desktop virtualization software.
Answer: A,C
NEW QUESTION 16
Refer to the exhibit.
A consultant is deploying a cluster using the customer-provided IP addressing information.
Which option in Foundation must be configured to ensure connectivity during the deployment?
- A. Multi-homing
- B. Network Segmentation
- C. Range Autofill
- D. Link Aggregation
Answer: A
NEW QUESTION 17
A customer has a G6 AHV cluster with 4x10GbE NICs on each node and the following configuration:
* Networking is set to default
* Only two NICs are connected
The customer receives the following critical message:
The NIC is disconnected from the switch, or the switchport is failing.
What should the consultant verify to resolve the issue?
- A. The NICs are configured for active-backup.
- B. The VLANs are configured correctly on the switch or tagged on the cluster.
- C. The NICs are connected for balance-slb.
- D. The other two 10GbE connections are removed from the default bond.
Answer: A
NEW QUESTION 18
A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.
Which log should the consultant check to troubleshoot this issue?
- A. foundation.app/contents/resouces/log
- B. /home/nutanix/foundation/log
- C. ~/data/logs/foundation.out
- D. ~/data/logs/foundation
Answer: B
NEW QUESTION 19
A consultant configures an ESXi cluster which will utilize a vSphere Distributed Switch (vDS). The consultant has just migrated the first host to the dvSwitch when several alerts appear within Prism Element regarding Host-to-CVM connectivity.
What is causing these alerts?
- A. The consultant migrated the CVM Backplane and VM network adapter over to the vDS.
- B. VLAN tags are incorrectly configured on the vDS port groups.
- C. The consultant migrated the CVM svm-iscsi-pg network adapter over to the vDS.
- D. The consultant migrated the CVM Backplane network adapter over to the vDS.
Answer: D
NEW QUESTION 20
Which Nutanix feature creation is described in the Knowledge Transfer?
- A. Data Protection Domain
- B. Calm Blueprints
- C. REST API
- D. Self Service Portal
Answer: A
NEW QUESTION 21
Refer to the exhibit.
A consultant is installing AOS 5.10 and ESXi 6.5 on three nodes. During the Foundation process, ESXi 6.5 is not available as one of the choices for hypervisor.
Which solution should the consultant use?
- A. Restart Foundation VM and refresh Foundation page.
- B. Update the Foundation whitelist from the support portal.
- C. Upload ESXi image to /home/Nutanix/foundation/isos/hypervisor/esx.
- D. Upload ESXi image to /home/Nutanix/foundation/nos/hypervisor/esx.
Answer: C
NEW QUESTION 22
To prepare for a new Nutanix installation, a consultant downloads the Foundation VM, imports the VM to their Desktop Virtualization Solution, and powers on the VM. The IPv4 static address on the host workstation and the Foundation VM have been configured, but pings between them fail.
Which two troubleshooting steps should the consultant perform? (Choose two.)
- A. Remove and re-import the Foundation VM to ensure the virtual NIC is set to Host-Only.
- B. Confirm the IP addresses and subnet masks are correct.
- C. Verify the virtual NIC in the Foundation VM is bound to the correct wireless network adapter.
- D. Verify the virtual NIC in the Foundation VM is bound to the correct physical Host adapter.
Answer: B,D
NEW QUESTION 23
After a recent installation using a flat switch, a consultant notices issues migrating the Nutanix nodes to the customer's network. The customer states that they are using VLANs on the production switch but not on the dedicated switch for IPMI. The customer does not require a manual configuration of the host and CVM.
What network changes need to be made to correct the issues?
- A. Us untagged VLANs for the CVM and host and trunk mode for IPMI.
- B. Use tagged VLANs for the CVM and host and access mode for IPMI.
- C. Use Native VLANs for the CVM and host and trunk mode for IPMI.
- D. Use Native VLANs for the CVM and host and access mode for IPMI.
Answer: D
NEW QUESTION 24
An existing Nutanix customer has several clusters in production and is adding a new cluster. The customer wants to create an AHV cluster that has already been racked and powered on remotely, with the factory image, using Prism Central.
Which step should the consultant take next?
- A. Build the cluster with the Foundation Applet
- B. Build the cluster with the Foundation VM.
- C. Build the cluster with Foundation Central.
- D. Bare metal image the nodes with the Foundation VM.
Answer: A
NEW QUESTION 25
A customer has engaged a Nutanix consultant to deploy a cluster consisting of two NX-3460-G6 blocks. The consultant arrives at the customer site and fines the following:
* One rack with a total of 5U available
* Two ToR switches with 14 total available ports
* Dual PDUs with six available sockets
What will prevent the consultant from successfully installing the cluster?
- A. Insufficient network ports for communication.
Insufficient sockets for power allocation. - B. Insufficient rack space for block installation.
Insufficient sockets for power allocation. - C. Insufficient network ports for communication.
Insufficient sockets for power allocation. - D. Insufficient sockets for power allocation.
Rack space may not be continuous. - E. Insufficient network ports for communication.
Rack space may not be continuous.
Answer: B
NEW QUESTION 26
A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)
- A. 192.168.5.253
- B. 192.168.5.254
- C. 192.168.5.2
- D. 192.168.5.1
Answer: B,C
NEW QUESTION 27
A consultant has deployed a Nutanix cluster with AOS 5.10.x, then discovers the customer's environment is running on AOS 5.6.x. The consultant decides to re-image the cluster using the foundation Java applet. During the Foundation discovery, all cluster nodes display a status of Unavailable.
What should the consultant do to resolve the issue?
- A. Reset the IPMI IP addresses.
- B. Use the Phoenix ISO
- C. Restart the Genesis service on the cluster.
- D. Destroy the cluster.
Answer: D
NEW QUESTION 28
While preparing for a new four-node cluster installation, the consultant has a Tech Review Call with the customer. The hardware is as follows:
* 4 nodes in 1 Block
* 8 x 10 GbE Ports
* 4 x 1 GbE IPMI Ports
* Adequate Ethernet ports are available
* Ethernet cables are correct and available
* Adequate rack space is available
Which remaining item must be confirmed as available onsite?
- A. Redundant 110v power
- B. Redundant 208v power
- C. Fibre Channel switches
- D. Crash Cart
Answer: B
NEW QUESTION 29
A consultant creates an AHV cluster and connects the Intel X550T NICs to the top of rack switch using Twinax cables. The activity and link lights are green. The cluster cannot communicate over the 10GbE link.
What is the first command the consultant should perform to troubleshoot the issue?
- A. manage_ovs show_bridges
- B. manage_ovs update_uplinks
- C. manage_ovs show_uplinks
- D. manage_ovs show_interfaces
Answer: A
NEW QUESTION 30
A consultant needs to review a customer's switch port configuration to identify any issues. Other customer requirements are as follows:
* Leverage LACP
* Native VLAN will not be used
* Use Multiple Upstream switches
* Use VLANs 20-25 and 30
* LACP Fallback has been Enabled
* vPC or MLAG has been configured
What must be included in a configuration in order to meet these requirements?
- A. Native VLAN set to 30
Ports in access mode to allow all necessary VLANs - B. Native VLAN set to default
Ports in access mode to allow all necessary VLANs - C. Native VLAN set to default
Ports trucked to allow all necessary VLANs - D. Native VLAN set to 30
Ports Trunked to allow all necessary VLANs
Answer: C
NEW QUESTION 31
A consultant is unable to install virtualization software on a laptop.
Which two versions of Foundation can be used to resolve this issue? (Choose two.)
- A. Foundation Portable
- B. Foundation Applet
- C. Foundation Central
- D. Foundation VM
Answer: A,B
NEW QUESTION 32
A consultant is using the Foundation applet to create a cluster. During the process the consultant refreshes the progress bar web page and is concerned when nothing loads.
What should the consultant do to verify that Foundation has completed successfully?
- A. Return to the Foundation configuration page and start over.
- B. Update Java on the Foundation VM.
- C. Connect to any CVM IP address from a web browser.
- D. Restart the Foundation process.
Answer: C
NEW QUESTION 33
What is the minimum number of nodes required for a Nutanix Cluster to support Replication Factor 3 (RF3) on a storage container?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 34
A consultant is setting up a new Hyper-V cluster. The customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available Which two Hyper-V features can be used to meet the requirements? (Choose two.)
- A. Failover Clustering
- B. Distributed Resource Scheduler
- C. Performance Resource Optimization
- D. High Availability
Answer: A,C
NEW QUESTION 35
......
Latest NCSC-Level-1 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.actual4cert.com/NCSC-Level-1-real-questions.html