[May-2025] SMI300XE Braindumps – SMI300XE Questions to Get Better Grades
SMI300XE Exam Dumps - Try Best SMI300XE Exam Questions - Actual4Cert
NEW QUESTION # 15
What will happen when you pull the GPU tray out partially?
- A. The tray will start spewing liquid everywhere.
- B. The tray will lock to prevent it from pulling too fast, and 1 person on each side of the tray needs to press down on the lever to unlock it.
- C. The tray will vibrate three times, alerting the user that it is released from the rail mechanism and is ready to be lifted, then start flashing a red light.
- D. The tray will start becoming very hot.
Answer: B
Explanation:
When theGPU tray is pulled out partially, itlocks in placetoprevent accidental removal or dropping. To fully remove it,two people must press down on the lever on each sidebefore continuing.
* Option A (Correct):Thetray locks automaticallyto ensure safe removal, and two people are needed to press the unlock levers.
* Option B (Incorrect):Thetray does not vibrate or flash redwhen released.
* Option C (Incorrect):Thetray does not contain liquid components.
* Option D (Incorrect):Thetray does not generate excessive heat upon removal.
NEW QUESTION # 16
Which SUM command is used to check basic system information?
- A. sum.exe call system information
- B. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command checksysteminfo
- C. sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
- D. sum.exe -I 10.1.1.100 -u ADMIN -p ADMIN -c checkassetinfo
Answer: C
Explanation:
TheSUM (Supermicro Update Manager) command to check basic system informationis:
css
CopyEdit
sum.exe -i 10.1.1.100 -p ADMIN -u ADMIN -c checkbasicinfo
* Option A (Correct):This is the correct syntax for retrievingbasic system information using SUM.
* Option B (Incorrect):The syntaxis incorrect and will not execute properly.
* Option C (Incorrect):The"checksysteminfo" command is not validin SUM.
* Option D (Incorrect):"checkassetinfo"retrieves system asset details, not basic system information.
NEW QUESTION # 17
The ROCm commands are not providing output or are failing. What could be the primary reason why?
And how can you validate the reasoning?
- A. The GPU baseboard may not be detected. You can determine this by opening the IPMI GUI and reviewing the FW section.
- B. If more than 3 GPUs are missing, then ROCm commands will not function. We need to verify that the 3 are missing in the IPMI GUI and review the GPU component section to make sure that at least 2 or fewer GPUs are missing.
- C. CPU is not installed correctly on the server. Review the OS dmesg logs for any odd CPU messages, then if located proceed to reseat the CPU.
- D. You suspect there are GPUs not detected. To determine which GPUs are missing, open the IPMI GUI and review the GPU component section to make sure all GPUs are present.
Answer: D
Explanation:
IfROCm commands fail to provide output, the primary issue is likelymissing or undetected GPUs. The best way to validate this is by checking the IPMI GUI and reviewing the GPU component sectionto ensure that all GPUs are present.
* Option A (Correct):Missing GPUsare the most common causeof ROCm failures. The IPMI GUI provides visibility into which GPUs are detected.
* Option B (Incorrect):CPU misalignment would causegeneral system failure, not ROCm-specific issues.
* Option C (Incorrect):The GPU baseboard status can be checked in IPMI but isnot the primary cause of ROCm failures.
* Option D (Incorrect):ROCm can function with multiple missing GPUs, butthe key issue is confirming GPU presence first.
NEW QUESTION # 18
When you first access the IPMI Web GUI, you will be prompted to log in. Where can you find the password?
- A. It will be on the label on the bottom of the system.
- B. It will be on the tag next to the I/O Module.
- C. It will be on the label on the bottom side of the system cover.
- D. Use the system model number as the password.
Answer: C
Explanation:
Supermicro ships systems with aunique BMC passwordfor security purposes. Thispassword is printed on a label located on the bottom side of the system cover.
* Option A (on the I/O module tag)is incorrect as the tag typically containsnetwork interface informationrather than credentials.
* Option B (using the system model number as a password)is incorrect because Supermicrodoes not use default passwords based on the model number.
* Option C (on the bottom of the system)is close but not precise;the correct location is the bottom side of the system cover.
* Option D (label on the bottom side of the system cover)is correct, as stated in theSupermicro IPMI and BMC login documentation.
Security Recommendation:Upon first login,Supermicro strongly recommends changing the default BMC password immediatelyfor security reasons.
NEW QUESTION # 19
Which SUM command is used to verify the AOC NIC installed on the system?
- A. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
- B. sum.exe-read all AOC-from 10.1.1.100
- C. sum.exe -ip 10.1.1.100 -user ADMIN -pass ADMIN -command getnicinfo
- D. sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocnicinfo
Answer: A
Explanation:
Toverify the AOC NIC installedon the system, the correctSUM (Supermicro Update Manager) command is:
css
CopyEdit
sum.exe -i 10.1.1.100 -u ADMIN -p ADMIN -c getaocinfo
* Option B (Correct):This command retrievesAOC NIC information.
* Option A (Incorrect):"getaocnicinfo" isnot a valid command.
* Option C (Incorrect):This syntax isincorrect and will not execute properly.
* Option D (Incorrect):"getnicinfo" retrievesgeneral NIC details, not AOC NIC-specific information.
NEW QUESTION # 20
What is the correct syntax for the AGFHC command to run recipes?
- A. ./agchf-r alljvll.yml
- B. agfhc.exe -r-s alljvll.yml
- C. ./agfhc -r alljvll.yml
- D. /agfhc -t -a alljvll.yml
Answer: C
Explanation:
The correct syntax for running recipes using theAGFHC toolis:
bash
CopyEdit
/agfhc -r alljvll.yml
This command runsa specified YAML recipe file (alljvll.yml)using the AGFHC tool in aLinux-based system.
* Option A (Incorrect):Contains an incorrect flag (-r should be separated).
* Option B (Incorrect):Uses incorrect flag format (-t -a), which is not part of AGFHC syntax.
* Option C (Incorrect):Uses Windows-style .exe format, which is incorrect for Linux.
* Option D (Correct):This follows thecorrect AGFHC syntaxfor running recipes in a Linux environment.
NEW QUESTION # 21
How would you identify and differentiate a failed GPU that needs to be replaced from other GPUs in the system that are functional?
- A. By the discoloration
- B. By the part number
- C. By the serial number
- D. By the warning light
Answer: D
Explanation:
A failed GPU in the Supermicro MI300X system can be identified usingthe warning light indicator.
Supermicro systems includeLED diagnostic indicatorsthat display the operational status of various components, including GPUs. When a GPU malfunctions, the system will trigger an alert that is displayed as a warning light on the GPU tray or the server chassis. This allows technicians to visually identify the faulty GPU without requiring extensive hardware testing.
* Discoloration (A)is not a reliable method of identifying a failed GPU as it would require physical degradation, which is uncommon.
* Serial numbers (B)andPart numbers (C)are used for inventory tracking but do not indicate functional status.
* Warning lights (D)are the recommended method, as documented in the system health monitoring section of Supermicro's documentation, which detailsLED indicators and diagnostic lights for system status monitoring.
NEW QUESTION # 22
What is the main reason the AGFHC tool is not functioning properly?
- A. Missing 1 DIMM in the system.
- B. CPU 2 is missing and the AGFHC requires 2 CPUs.
- C. Missing 1 or more GPUs in the system.
- D. PSU needs to be reseated.
Answer: B
Explanation:
TheAGFHC tool requires a dual-CPU setupto function properly. IfCPU 2 is missing, the toolfails to operate correctly.
* Option A (Incorrect):Thetool does not depend on DIMM configuration.
* Option B (Incorrect):Missing GPUscan cause errors, butthe tool can still function.
* Option C (Correct):AGFHC requires both CPUsto be installed.
* Option D (Incorrect):PSU reseating isnot requiredfor AGFHC operation.
NEW QUESTION # 23
In the IPMI Dashboard, how can the health event log help you identify a failure with a component like a fan or power supply?
- A. The purple status indicator in the IPMI Dashboard indicates failures.
- B. The blades will be turning a bright orange.
- C. In IPMI under Configuration, configure a new fan.
- D. The red severity status identifies failed components in the log.
Answer: D
Explanation:
TheIPMI Dashboard health event loghelpsidentify component failuresusing ared severity status indicator
. If a fan or power supply fails, theevent log will mark it as a red alert, allowing users to take corrective action.
* Option A (Correct):Red severity status in theevent logsignals a failed component.
* Option B (Incorrect):Fansdo not change colorswhen failing.
* Option C (Incorrect):There is nopurple status indicatorin IPMI for failures.
* Option D (Incorrect):You cannot configure a new fan inIPMI under Configuration; you must replace a failed fan.
NEW QUESTION # 24
How many GPUs can be missing or undetected by the system to successfully execute the ROCm software commands?
- A. 0
- B. 1
- C. 2
- D. None
Answer: C
Explanation:
The ROCm softwarerequires at least one GPU to function. It can stilloperate with up to 2 missing GPUs, butif 3 or more GPUs are missing, ROCm commands will fail.
* Option A (Incorrect):ROCmfails if 3 GPUs are missing.
* Option B (Incorrect):The software can function withmore than 1 GPU missing.
* Option C (Correct):ROCmcan still execute commands if only 1 or 2 GPUs are missing.
* Option D (Incorrect):At least 1 GPUmust be detected for ROCm to work.
NEW QUESTION # 25
If you need to replace a failed GPU in an MI300X system, what must you do to gain access to the GPUs in the system?
- A. Use the LSPCI command.
- B. Remove the GPU tray.
- C. Configure the SCC.
- D. Update the AMD command.
Answer: B
Explanation:
Toaccess and replace a failed GPUin theMI300X system, you mustremove the GPU tray.
* Option A (Incorrect):UpdatingAMD commandsdoes not physically grant access to GPUs.
* Option B (Incorrect):LSPCIis used tolist PCI devices, not to physically access the GPUs.
* Option C (Incorrect):SCC configurationis unrelated to physical GPU replacement.
* Option D (Correct):Removing the GPU trayis the only way tophysically access and replace GPUs.
NEW QUESTION # 26
What information is useful for identifying system issues and their timing?
- A. Last login attempt
- B. GPU memory specification
- C. Event log
- D. Subnet Mask
Answer: C
Explanation:
Theevent logis the primary source of information for identifyingsystem issues and their exact timing. The IPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.
* Option A (Incorrect):GPU memory specifications do not provide issue tracking information.
* Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.
* Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.
* Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.
NEW QUESTION # 27
When replacing a failed GPU, what is the proper torque driver setting for tightening the GPU screws?
- A. 5.3 Nm
- B. 6-8 in-lbf
- C. 4.2 in-lbf
- D. 9.5 in-lbf
Answer: B
Explanation:
Thecorrect torque setting for GPU screwsin anMI300X systemis6-8 in-lbf. This ensures asecure fit without overtightening, which could damage the GPU.
* Option C (Correct):6-8 in-lbf isthe recommended torquefor securing GPU screws.
* Option A (Incorrect):4.2 in-lbf istoo low, leading to loose screws.
* Option B (Incorrect):9.5 in-lbf istoo high, risking damage to the GPU mounting.
* Option D (Incorrect):5.3 Nm isnot used for GPU mounting screws.
NEW QUESTION # 28
......
Verified SMI300XE exam dumps Q&As with Correct 32 Questions and Answers: https://www.actual4cert.com/SMI300XE-real-questions.html
Get New SMI300XE Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1g7n94ktIMnS_jL3EQAvb9ncZrZZZmkUd