[Oct 30, 2021] HPE2-T37 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass HPE2-T37 Exam - Real Test Engine PDF with 41 Questions
NEW QUESTION 19
What is required to add remote frame link topology to HPE OneView?
- A. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- B. Management ports of the remote frame link topology must be connected to the management LAN.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
Answer: C
NEW QUESTION 20
Which statement about a server profile for an Apollo system is true?
- A. UEFI optimized is the only available boot mode
- B. Enclosure Group Is automatically selected
- C. Fibre Channel connections can be defined
- D. Virtual WWNs and MAC addresses can be defined
Answer: D
NEW QUESTION 21
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Appliance support dump
- C. Firmware deployment support dump
- D. Enclosure group support dump
- E. Maintenance console support dump
Answer: A,E
NEW QUESTION 22
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Secure boot
- B. BIOS management
- C. Boot from SAN
- D. Workload profile
Answer: A
NEW QUESTION 23
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?
- A. An existing volume can be replicated automatically when creating a server profile.
- B. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
- C. Boot volumes can be created on demand and defined in the server profile template.
- D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
Answer: C
NEW QUESTION 24
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether the appropriate license for HPE Primera Is available in HPE OneView.
- B. whether WSAPI service is enabled on HPE Primera array.
- C. whether array management using HPE OneView is enabled in SSMC.
- D. whether there are at least two Fibre Channel networks defined in HPE OneView.
Answer: B
NEW QUESTION 25
What is the best practice when deploying an HPE OneView appliance?
- A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- C. Deploy two HPE OneView appliances and configure them in HA mode.
- D. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
Answer: B
NEW QUESTION 26
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- B. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- C. Ensure that the Link Aggregation Group time-out value matches the server set values.
- D. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
Answer: B
NEW QUESTION 27
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- B. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- C. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- D. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
Answer: C
NEW QUESTION 28
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.
- B. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- C. Not all of the features will be available for HPE ProLiant G7 systems.
- D. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
Answer: B
NEW QUESTION 29
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. An external repository must be created, because standalone components are supported only In an external repository.
- B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- C. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
- D. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
Answer: A
NEW QUESTION 30
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile within server profile template and update all profiles.
- C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- D. Set a specific workload profile using IL0 interface for each individual server.
Answer: C
NEW QUESTION 31
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION 32
Which statement about M-LAG setup is true?
- A. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
- B. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
- C. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- D. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
Answer: C
NEW QUESTION 33
Which statement about an HPE OneView server profile is true?
- A. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
- B. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
- C. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
- D. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
Answer: A
NEW QUESTION 34
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Superdome Flex 280
- B. HPE MSA 2062 Storage Array
- C. HPE Synergy Virtual Connect SE 32Gb FC Module
- D. HPE B-series SN6600B Fibre Channel Switch
- E. HPE Synergy 480 Compute Modules
Answer: C,D
NEW QUESTION 35
......
Get New HPE2-T37 Certification Practice Test Questions Exam Dumps: https://www.actual4cert.com/HPE2-T37-real-questions.html
Real HPE2-T37 Exam Dumps Questions Valid HPE2-T37 Dumps PDF: https://drive.google.com/open?id=10l-G06WDdw9Ztk65OHbLFvMrSiTPsk-U