Steps Necessary To Pass The C1000-026 Exam from Training Expert Actual4Cert
Valid Way To Pass IBM Security's C1000-026 Exam
Understanding technical and functional aspects of OpenShift Container Platform Architecture
The following will be discussed in IBM C1000-026 dumps:
- Describe the config documents utilized for networkDNS
- Explain why numerous expert hosts may be required
- Explain the effect of driving a picture into the OpenShift Container Registry
- Describe the parts of a case
- Describe the motivation behind the Load Balancer
- Explain how an assistance is utilized for outer and inner correspondence
- Explain how units are utilized to build execution
- Describe the means of case creation
- Describe the different stockpiling arrangements accessible for OpenShift
- List different administrations that a holder can give
NEW QUESTION 11
What should an administrator do to successfully upgrade an IBM Security QRadar system from an older
- A. Verify the upgrade path and update the QRadar apps.
- B. Verify the upgrade path, and review the software, hardware and high availability requirements.
- C. Review the software, hardware and high availability requirements, and consider to update the firmware on
- D. Review the release notes and review the architecture.
Answer: B
Explanation:
IBM Security QRadar appliances.
Reference:
b_qradar_upgrade.pdf (9)
NEW QUESTION 12
A QRadar administrator added High Availability (HA) to the Event Processor and needs to verify the crossover link status between the primary and secondary hosts.
Which commands can be used to verify the crossover status? (Choose two.)
- A. /opt/qradar/ha/bin/getStatus crossover
- B. /opt/qradar/ha/bin/ha_getstate.sh
- C. /opt/qradar/ha/bin/ha cstate
- D. /opt/qradar/ha/bin/qradar_nettune.pl linkaggr <interface> status
- E. /opt/qradar/ha/bin/qradar_nettune.pl crossover status
- F. cat /proc/drbd
Answer: E,F
Explanation:
Reference:
https://www.ibm.com/developerworks/community/forums/html/topic?id=5c01c198-016d-461ba648-a87cdc445768
NEW QUESTION 13
An administrator needs to import data into QRadar for a specific use case.
The data that has been provided to the administrator is stored in records that map a key to a value.
Which type of data collection must the administrator create?
- A. Reference map of sets
- B. Reference set
- C. Reference map of maps
- D. Reference map
Answer: A
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.2/com.ibm.qradar.doc/ t_qradar_conifig_rul_resp_reference_set.html
NEW QUESTION 14
An administrator needs data backup.
What information is contained in the data backup?
- A. Audit log information, Event data, Indexes, Index management information, Flow data, Report data
- B. Audit log information, Event data, Indexes, Index management information, Flow data, Report data, Groups
- C. Audit log information, Event data, Flow data, Report data, Indexes
- D. Audit log information, Event data, Flow data, Report data, Indexes, Log sources
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.0/com.ibm.qradar.doc/ c_qradar_adm_man_back_recovery.html
NEW QUESTION 15
An administrator would like to extend the functionality of QRadar using an external application.
Which file format is supported to successfully upload an application from the QRadar Console?
- A. .tgz
- B. .exe
- C. .zip
- D. .sh
Answer: C
Explanation:
Reference:
b_qradar_appframework_devguide.pdf
NEW QUESTION 16
An administrator needs to save the nightly QRadar backups on a network storage.
The administrator has established the connection to the network storage.
What should the administrator do next?
- A. Configure the new network storage using the Assets Manager
- B. Change the Backup Repository Path to the network storage location using the System Settings window.
- C. Change the Backup Repository Path to the network storage location using the Backup Recovery Configuration window.
- D. Change the Backup Repository Path by adding a new Network Activity Rule.
Answer: C
Explanation:
Explanation/Reference: http://ftpmirror.your.org/pub/misc/ftp.software.ibm.com/software/security/products/qradar/ documents/7.2.8/en/b_qradar_admin_guide.pdf (146)
NEW QUESTION 17
When an administrator attempts to edit a log source after upgrading QRadar, a Device Support Module (DSM), a protocol, or Vulnerability Information Services (VIS) components, the following error message appears.
An error has occurred. Refresh your browser (press F5) and attempt the action again. If the problem persists, please contact customer support for assistance.
What action should the administrator take to troubleshoot this issue? (Choose two.)
- A. systemctl restart httpd
- B. systemctl start tomcat
- C. systemctl restart ecs-ep
- D. systemctl restart snmpd
- E. Clear browser cache
- F. systemctl restart iptables
Answer: B,E
Explanation:
Reference:
t_QRadar_Troubleshooting_guide_PurgeFiles.html
NEW QUESTION 18
An administrator would like to add a new managed host which uses an existing Network Address Translation (NAT).
Which parameters have to be provided if "Host is NATed" is chosen while adding a managed host?
- A. Select Network Attached Telemetric, Enter MAC address of the server or appliance to add
- B. Select Network Attached Telemetric, Enter public IP of the server or appliance to add
- C. Select NATed network, Enter public IP of the server or appliance to add
- D. Select NATed network, Enter MAC address of the server or appliance to add
Answer: C
Explanation:
Reference:
https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwihsu3Li5XmAhVYwAIHHeCLDtoQFjAAegQIBhAC &url=https%3A%2F%2Fwww.ibm.com%2Fdeveloperworks%2Fcommunity%2Fforums%2Fajax%2Fdownload
%2Fd5b20a5b-11bd-4a1d-b294-08ec138eb0e1%2F9d086dd8-eee9-4cbd-912d-26059ffdd0ca%
2FQRadar_721_AdminGuide.pdf&usg=AOvVaw1GO4OmOjWV7uiyCLrdE0FV
NEW QUESTION 19
A QRadar administrator added High Availability (HA) to the Event Processor and needs to verify the crossover link status between the primary and secondary hosts.
Which commands can be used to verify the crossover status? (Choose two.)
- A. /opt/qradar/ha/bin/getStatus crossover
- B. /opt/qradar/ha/bin/ha_getstate.sh
- C. /opt/qradar/ha/bin/ha cstate
- D. /opt/qradar/ha/bin/qradar_nettune.pl linkaggr <interface> status
- E. /opt/qradar/ha/bin/qradar_nettune.pl crossover status
- F. cat /proc/drbd
Answer: E,F
Explanation:
Explanation/Reference: https://www.ibm.com/developerworks/community/forums/html/topic?id=5c01c198-016d-461b-a648- a87cdc445768
NEW QUESTION 20
What is the minimum memory in gigabyte (GB) required for a QRadar All-in-One Virtual 3199 appliance?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Reference:
c_qradar_ha_vrt_ap_reqs.html
NEW QUESTION 21
What happens if QRadar receives events at a higher rate than the license allows?
- A. The source system will be asked to resend the events later
- B. The events will be dropped immediately
- C. The events will not be parsed
- D. The events will be put into queues
Answer: D
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-event-and-flow-burst-handling-buffer
NEW QUESTION 22
An administrator has added a new Event Processor to a QRadar deployment.
How many events per second (EPS) are granted from the temporary license and how many days will those EPS last?
- A. 10000 EPS for a 45 day period
- B. 10000 EPS for a 35 day period
- C. 5000 EPS for a 45 day period
- D. 5000 EPS for a 35 day period
Answer: D
Explanation:
Reference:
c_qradar_adm_license_mgmt.html
NEW QUESTION 23
What is a reason for restarting hostcontext service in QRadar?
- A. A new app was installed
- B. A new network hierarchy was uploaded
- C. The host is not responding to deploy requests
- D. A new user was created and it needs to be replicated
Answer: C
Explanation:
Explanation/Reference: https://www.ibm.com/support/pages/qradar-restarting-hostcontext-q-switch
NEW QUESTION 24
An administrator wants to upload a file with information related to network hierarchy instead of using the GUI wizard.
How can the administrator do this?
- A. Modify /opt/qradar/conf/remotenet.conf
- B. Use upload button in Network Hierarchy wizard
- C. Upload file using REST API
- D. Install application "Network Hierarchy Management for QRadar"
Answer: D
Explanation:
Reference:
https://www.ibm.com/support/pages/qradar-restoring-network-hierarchy-using-network-hierarchymanagement- qradar-app-updated
NEW QUESTION 25
An administrator has added a new Event Processor to a QRadar deployment.
How many events per second (EPS) are granted from the temporary license and how many days will those EPS last?
- A. 10000 EPS for a 45 day period
- B. 10000 EPS for a 35 day period
- C. 5000 EPS for a 45 day period
- D. 5000 EPS for a 35 day period
Answer: D
Explanation:
Explanation/Reference: https://www.ibm.com/support/knowledgecenter/en/SS42VS_7.3.0/com.ibm.qradar.doc/ c_qradar_adm_license_mgmt.html
NEW QUESTION 26
Which of the following dashboards is a QRadar default Dashboard?
- A. Threat and Security Monitoring
- B. Monitoring Overview
- C. Vulnerability Overview
- D. Compliance and Reporting Monitoring
Answer: A
Explanation:
Reference:
c_qrm_default_dboard.html
NEW QUESTION 27
An administrator needs to save the nightly QRadar backups on a network storage.
The administrator has established the connection to the network storage.
What should the administrator do next?
- A. Configure the new network storage using the Assets Manager
- B. Change the Backup Repository Path to the network storage location using the System Settings window.
- C. Change the Backup Repository Path to the network storage location using the Backup Recovery Configuration window.
- D. Change the Backup Repository Path by adding a new Network Activity Rule.
Answer: C
Explanation:
Reference:
documents/7.2.8/en/b_qradar_admin_guide.pdf (146)
NEW QUESTION 28
Which app should be used for monitoring QRadar performance and health?
- A. QRadar Extension Management
- B. QRadar Performance Overview
- C. QRadar Monitoring Intelligence
- D. QRadar Deployment Intelligence
Answer: D
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/en/SSKMKU/com.ibm.QDIapp.doc/ c_qapps_QDI_intro.html
NEW QUESTION 29
An administrator logs in to the Offenses tab and finds a large number of new Offenses that need action.
What column in the list of Offenses should the administrator use to prioritize them?
- A. Offense Type
- B. Source IPs
- C. Last Event/Flow
- D. Magnitude
Answer: D
Explanation:
Reference:
https://www.ibm.com/support/knowledgecenter/SS42VS_7.3.2/com.ibm.qradar.doc/ b_qradar_users_guide.pdf (43)
NEW QUESTION 30
......
All C1000-026 Dumps and IBM Security QRadar SIEM V7.3.2 Fundamental Administration Training Courses: https://www.actual4cert.com/C1000-026-real-questions.html