100% Free MTCNA - MikroTik Training MTCNA Dumps PDF Demo Cert Guide Cover [Q91-Q113]

Share

100% Free MTCNA - MikroTik Training MTCNA Dumps PDF Demo Cert Guide Cover

PDF Exam Material 2021 Realistic MTCNA Dumps Questions 


Topics of MikroTik Certified Network Associate (MTCNA) Exam

The syllabus may get updated anytime so it is always recommended to visit the official website of MikroTik or check the updated MTCNA dumps to access the latest course contents. The following contents are included in the MikroTik Certified Network Associate (MTCNA) exam:

1. Introduction

This module constitutes of the following subtopics:

  • Router identity
  • Package types
  • Null Modem cable
  • LAN IP address and default gateway
  • Upgrading RouterOS
  • Manage RouterOS services
  • Saving and restoring the backup
  • Manage RouterOS logins
  • RouterOS command-line interface (CLI)
  • What is RouterBOARD
  • About MikroTik
  • RouterOS CLI principles
  • Default configuration
  • Managing configuration backups
  • Editing an export file
  • WAN DHCP-client
  • What is RouterOS
  • First time accessing the router
  • SSH and Telnet
  • RouterBOOT firmware upgrade
  • RouterOS license levels
  • WebFig and Quick Set
  • Reinstalling a RouterOS device (Netinstall)
  • Resetting a RouterOS device
  • Difference between a backup and an export (.rsc) file
  • Command history and its benefits
  • New terminal in WinBox/WebFig
  • Initial configuration (Internet access)
  • WinBox and MAC-WinBox
  • Basic Firewall - NAT masquerade
  • Ways of upgrading

2. DHCP

This module constitutes of the following subtopics:

  • RouterOS ARP table
  • Leases management
  • DHCP client
  • DHCP server and client
  • DHCP server network configuration
  • Address Resolution Protocol (ARP)
  • DHCP server setup
  • ARP modes

3. Bridging

This module constitutes of the following subtopics:

  • Creating bridges
  • Bridge wireless networks
  • Bridge concepts and settings
  • Adding ports to bridges
  • Bridging overview
  • Station bridge

4. Routing

This module constitutes of the following subtopics:

  • Creating routes
  • Setting default route
  • Static routing
  • Routing overview
  • Implementing static routing in a simple network
  • Route flags
  • Routing concepts
  • Managing dynamic routes

5. Wireless

This module constitutes of the following subtopics:

  • Access List
  • Setup a simple wireless link
  • Default Forward
  • Frequencies (bands, channels) data-rates / chains (tx power, RX sensitivity, country regulations)
  • Registration table
  • WPS accept, WPS client
  • 802.11a/b/g/n/ac Concepts
  • Access Point configuration
  • Default Authenticate
  • Station configuration
  • Snooper
  • Connect List
  • Wireless Security and Encryption
  • WPA-PSK, WPA2-PSK
  • Monitoring Tools

6. Firewall

This module constitutes of the following subtopics:

  • Source NAT
  • Structure, chains, and actions
  • Connection tracking and states
  • Protection your customers (forward)
  • Filter actions
  • Firewall principles
  • Masquerade and src-nat action
  • Protecting your router (input)
  • Basic Address-List
  • Firewall Filter in action
  • FastTrack
  • DST-nat and redirect actions
  • Destination NAT

7. QoS

This module constitutes of the following subtopics:

  • Pcq-limit configuration
  • Destinations
  • Simple Queue
  • Target
  • Bursting
  • One Simple queue for the whole network (PCQ)
  • Max-limit and limit-at
  • Pcq-rate configuration

8. Tunnels

This module constitutes of the following subtopics:

  • PPTP client and a PPTP server (Quick Set)
  • PPPoE server
  • PPP profile
  • PPP settings
  • Assigning to a service
  • PPP secret
  • Secure local network
  • Point-to-point addresses
  • Secure remote networks communication
  • SSTP client
  • Managing ranges
  • PPPoE service-name
  • Creating pool
  • PPP status
  • PPPoE client
  • IP pool

9. Misc

This module constitutes of the following subtopics:

  • Interface traffic monitor
  • SNMP
  • Monitoring
  • System logs, enabling debug logs
  • Ping
  • Contacting [email protected]
  • Traceroute
  • Readable configuration (item comments and names)
  • E-mail
  • Graphs
  • Torch
  • Netwatch
  • Profiler (CPU load)
  • support.rif, autosupout.rif and viewer
  • Network diagrams
  • RouterOS tools
  • The Dude

How to book the MikroTik Certified Network Associate (MTCNA) Exam

You have to follow these steps to participate in the MikroTik Certified Network Associate (MTCNA) exam:

  • Step 1: Hover on to the training portal of MikroTik
  • Step 2: Prepare and take the MTCNA exam test
  • Step 3: Select your exam i.e. MTCNA
  • Step 4: Click the link available
  • Step 5: Create a new account and log in
  • Step 6: Follow the instructions to schedule your exam

The benefit of obtaining the MikroTik Certified Network Associate (MTCNA) Exam Certification

We live in the era of information technology, where all the major companies in the wireless internet services industry have become the backbone of wireless radios and routers. Experts at Mikrotik have countless possibilities. If you are searching for a job in Mikrotik MCTNA, PNY training will offer you a comprehensive Mikrotik MCTNA training program course to develop your skills and career prospects. MikrotikMCTNA has many advantages:

  • Huge demand: Mega-companies are using Mikrotik products and routers and their demand is growing with every passing day. You are less worried about getting a job at Mikrotik MCTNA in the Mikrotik market.

  • Strong salary: There are not many Mikrotik MCTNA specialists who can be recruited to work for Mikrotik. Thus, individuals who are experts in this area will secure a high-sum cash job for their services.

NEW QUESTION 91
Consider the following diagram. We want to communicate from a device on LAN1 to a device on LAN2.
Assuming that all necessary configurations are already included on R2, which of the following configurations in R1 would enable this communication?

  • A. /ip route add dst-address=0.0.0.0/0 gateway=192.168.99.2
  • B. /ip route add dst-address=192.168.1.0/24 src-address=192.168.0.0/24 gateway=192.168.99.2
  • C. /ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2
  • D. /ip route add dst-address=0.0.0.0/0 gateway=Ether1
  • E. /ip route add dst-address=192.168.0.0/24 gateway=192.168.0.1

Answer: C

 

NEW QUESTION 92
In RouterOS queue configurations the word "total" usually represents

  • A. upload + download
  • B. Download
  • C. download - upload
  • D. upload

Answer: A

 

NEW QUESTION 93
What menus should be used to allow certain websites to be accessed from behind a Hot-Spot interface, without client authentication

  • A. ip Hot-Spot walled-garden ip
  • B. ip Hot-Spot ip-binding
  • C. ip Hot-Spot profile
  • D. ip Hot-Spot walled-garden

Answer: D

 

NEW QUESTION 94
MikroTik RouterOS is sending logs to an external syslog server. Which protocol and port is used by RouterOS for sending logs (by default)?

  • A. UDP 113
  • B. UDP 514
  • C. TCP 110
  • D. UDP 21

Answer: B

 

NEW QUESTION 95
Which of the following is the decimal and hexadecimal equivalents of the binary number 10011101?

  • A. 157, 0x9D
  • B. 185, 0xB9
  • C. 155, 0x9B
  • D. 159, 0x9F

Answer: A

 

NEW QUESTION 96
What protocol is used to find the hardware address of a local device?

  • A. RARP
  • B. ICMP
  • C. IP
  • D. ARP

Answer: D

 

NEW QUESTION 97
DHCP server is configured on a router's ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Possible IP pools, that can be used by this DHCP server, are:

  • A. 192.168.0.1-192.168.0.14
  • B. 192.169.0.1-192.169.0.254
  • C. 192.168.0.1-192.168.0.99 , 192.168.0.101-192.168.0.254
  • D. 192.168.0.1-192.168.0.255

Answer: C

 

NEW QUESTION 98
You have a DHCP server on your MikroTik router. The IP addresses 10.1.2.2-10.2.2.20 are distributed in the DHCP network. Additionally, 3 static IP address are defined for your servers: 10.1.2.31-10.1.2.33.
After a while 20 more IP addresses need to be distributed in the network. It is possible to distribute the extra IP address without adding another DHCP Server:

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 99
RouterOS log messages are stored on disk by default

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 100
Mark all correct statements about /export (rsc file).

  • A. Exports logs from /log print
  • B. Exports full configuration of the router
  • C. Exports only part of the configuration (for example /ip firewall)
  • D. Exports files could not edited
  • E. Exports scripts from /system script

Answer: C

 

NEW QUESTION 101
Which firewall chain should you use to filter clients HTTP traffic going through the router?

  • A. input
  • B. prerouting
  • C. forward
  • D. output

Answer: C

 

NEW QUESTION 102
A DHCP server is configured on a LAN interface which is a port on a bridge. The DHCP server does not start.
What could be the reason(s)?

  • A. The DHCP server can not run on an interface which is also a bridge port
  • B. There may be multiple IP addresses set on the LAN interface
  • C. The IP address pool could be incorrectly defined
  • D. There might not be an IP address assigned to the LAN Interface

Answer: A

 

NEW QUESTION 103
What is the default TTL (time to live) on a router that an IP packet can experience before it will be discarded?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A

 

NEW QUESTION 104
Which of the following is the valid host range for the subnet on which the IP address 192.168.168.188
255.255.255.192 resides?

  • A. 192.168.168.129-190
  • B. 192.168.168.128-190
  • C. 192.168.168.129-191
  • D. 192.168.168.128-192

Answer: A

 

NEW QUESTION 105
Which default route will be active?
/ip route
add disabled=no distance=10 dst-address=0.0.0.0/0 gateway=1.1.1.1
add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=2.2.2.2

  • A. Route via gateway 2.2.2.2
  • B. Route via gateway 1.1.1.1

Answer: A

 

NEW QUESTION 106
What is the address range of a Class B network address in binary?

  • A. 0xxxxxxx
  • B. 110xxxxx
  • C. 10xxxxxx
  • D. 01xxxxxx

Answer: B

 

NEW QUESTION 107
In WinBox when clicking the 'Backup' button in the Files window, the following happens (select all that apply):

  • A. Optionally backup name and password can be specified
  • B. Backup file will contain usernames and passwords of the router
  • C. Backup file is saved to the computer desktop
  • D. Backup file is created. Name contains the router identity, the date and time of its creation

Answer: D

 

NEW QUESTION 108
What is the main reason the OSI model was created?

  • A. So Cisco could use the model.
  • B. To create a layered model larger than the DoD model.
  • C. So application developers can change only one layer's protocols at a time.
  • D. So different networks could communicate.

Answer: D

 

NEW QUESTION 109
The network address is

  • A. The last address of the subnet
  • B. The first address of the subnet
  • C. The first usable address of the subnet

Answer: B

 

NEW QUESTION 110
What does a VLAN do?

  • A. Acts as the fastest port to all servers.
  • B. Provides multiple collision domains on one switch port.
  • C. Provides multiple broadcast domains within a single collision domain.
  • D. Breaks up broadcast domains in a layer 2 switch internetwork.

Answer: D

 

NEW QUESTION 111
What kind of users are listed in the "/user" menu?

  • A. Hot-Spot users
  • B. wireless users
  • C. router users
  • D. pptp users

Answer: C

 

NEW QUESTION 112
For a Simple Queue to apply a bandwidth restrictions on a bridged interface, following must be done:

  • A. Use mangle to mark the connections
  • B. Configure an IP address on the bridge interface
  • C. Associate the Simple Queue to the bridge interface
  • D. Enable 'Use IP Firewall' in bridge settings

Answer: A

 

NEW QUESTION 113
......

Updated MikroTik MTCNA Dumps – PDF & Online Engine: https://www.actual4cert.com/MTCNA-real-questions.html

MTCNA.pdf - Questions Answers PDF Sample Questions Reliable: https://drive.google.com/open?id=10mZ1g_jhQfYtgjGTjQ6LTO2jLnpL15Wl