[Full-Version] 2022 Updated MikroTik Study Guide MTCNA Dumps Questions
Newest MTCNA Exam Dumps Achieve Success in Actual MTCNA Exam
Topics of MikroTik Certified Network Associate (MTCNA) Exam
The syllabus may get updated anytime so it is always recommended to visit the official website of MikroTik or check the updated MTCNA exam dumps to access the latest course contents. The following contents are included in the MikroTik Certified Network Associate (MTCNA) exam:
1. Introduction
This module constitutes of the following subtopics:
- About MikroTik
- Ways of upgrading
- Manage RouterOS logins
- Default configuration
- Reinstalling a RouterOS device (Netinstall)
- RouterOS license levels
- Resetting a RouterOS device
- Null Modem cable
- RouterOS CLI principles
- New terminal in WinBox/WebFig
- LAN IP address and default gateway
- Difference between a backup and an export (.rsc) file
- Router identity
- Managing configuration backups
- WinBox and MAC-WinBox
2. DHCP
This module constitutes of the following subtopics:
- Address Resolution Protocol (ARP)
- DHCP server setup
- Leases management
- RouterOS ARP table
- DHCP server network configuration
- DHCP client
3. Bridging
This module constitutes of the following subtopics:
- Adding ports to bridges
- Station bridge
- Creating bridges
4. Routing
This module constitutes of the following subtopics:
- Managing dynamic routes
- Routing concepts
- Creating routes
- Static routing
- Route flags
- Setting default route
- Routing overview
5. Wireless
This module constitutes of the following subtopics:
- Access Point configuration
- Monitoring Tools
- Frequencies (bands, channels) data-rates / chains (tx power, RX sensitivity, country regulations)
- Connect List
- Snooper
- Registration table
- WPS accept, WPS client
- 802.11a/b/g/n/ac Concepts
- Station configuration
- Access List
- Wireless Security and Encryption
- Default Authenticate
- WPA-PSK, WPA2-PSK
- Setup a simple wireless link
6. Firewall
This module constitutes of the following subtopics:
- Source NAT
- Connection tracking and states
- Protection your customers (forward)
- DST-nat and redirect actions
- Firewall Filter in action
- Filter actions
7. QoS
This module constitutes of the following subtopics:
- Simple Queue
- Pcq-rate configuration
- Pcq-limit configuration
- Bursting
8. Tunnels
This module constitutes of the following subtopics:
- Creating pool
- PPPoE client
- Secure remote networks communication
- PPPoE service-name
- Managing ranges
- PPTP client and a PPTP server (Quick Set)
- PPP profile
- PPP settings
- PPPoE server
- Secure local network
- PPP status
9. Misc
This module constitutes of the following subtopics:
- RouterOS tools
- The Dude
- SNMP
- Profiler (CPU load)
- Torch
- Readable configuration (item comments and names)
- System logs, enabling debug logs
- Graphs
How to Prepare For MikroTik Certified Network Associate (MTCNA) Exam
Preparation Guide for MikroTik Certified Network Associate (MTCNA) Exam
Introduction
The Certified Network Associate MTCNA exam test is administered by MikroTik. MikroTik is a Latvian maker of network equipment. Wired and wireless network routers, network switches, access points, as well as operating systems and auxiliary software are developed and sold by the business. The company was founded in 1996 with a focus on equipment sales in emerging markets. As of August 2019, more than 280 employees were listed on the business website. In 2015, Mikrotik was the 20th largest company in Latvia.
Training sessions for MikroTik are arranged and given at different locations around the world by MikroTik Training Centers. Network engineers, integrators, and managers who want to learn about the routing and management of wired and wireless networks using MikroTik Router-OS will be present.
If students study these exam dumps and then test their knowledge on MTCNA practice exams, they can ensure passing the exam with good grades and can overcome all difficulties. This guide provides a detailed overview of the MikroTik Certified Network Associate (MTCNA) certification including all sorts of prerequisites for the exam, the exam format, topics covered, exam difficulty, and preparation of MTCNA exam dumps.
NEW QUESTION 99
What can be used as 'target-address' in the simple queue?
- A. server's address
- B. client's MAC address
- C. address list name
- D. client's address
Answer: D
NEW QUESTION 100
Select all tunnels that support authentication of clients with a username and password.
- A. IPIP
- B. EoIP
- C. PPPoE
- D. PPTP/L2TP
- E. OpenVPN
Answer: C
NEW QUESTION 101
If you wish to block user access to MSN messenger, which chain should the firewall rule be placed in?
- A. process
- B. forward
- C. input
- D. output
Answer: B
NEW QUESTION 102
Which of the protocols below is used by Netinstall?
- A. dhcp
- B. arp
- C. bootp
- D. rarp
Answer: C
NEW QUESTION 103
Router has wireless and ethernet client interfaces, all client interfaces are bridged. To create a DHCP service for all clients, DHCP server must be configured on:
- A. DHCP service is not possible in this setup
- B. Ethernet and wireless interfaces
- C. Every bridge port
- D. Only on the bridge interface
Answer: D
NEW QUESTION 104
If 'check-gateway' is enabled for an ECMP route and one of the gateways is unreachable, then:
- A. The unreachable gateway is not going be used in Round Robin algorithm.
- B. ECMP is going to send packets to all gateways even if one is unreachable.
- C. The ECMP route becomes inactive.
Answer: A
NEW QUESTION 105
PPPoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host, it will not be able to create PPPoE tunnel to that PPPoE server.
- A. False
- B. True
Answer: A
NEW QUESTION 106
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.
- A. Write a script in '/system script' to set the clock
- B. Open the router and ensure the CMOS battery is fine.
- C. Configure '/system ntp client' and set a valid and reachable NTP server address.
- D. Configure '/system ntp server' and set a valid and reachable NTP client address.
Answer: C
NEW QUESTION 107
Which command is used to upgrade an IOS on a Cisco router?
- A. copy tftp flash
- B. config net
- C. copy tftp start
- D. copy tftp run
Answer: A
NEW QUESTION 108
Which of the following protocols / port s are used for SNMP. (Simple Network Management Protocol)
- A. TCP 162
- B. TCP 161
- C. UDP 161
- D. TCP 123
- E. UDP 162
- F. TCP 25
Answer: C,E
NEW QUESTION 109
Please select valid scan-list values in interface wireless configuration:
- A. 5560,5620-5700
- B. 5640~5680
- C. 5540,5560,5620+5700
- D. default,5560,5600,5660-5700
Answer: A,D
NEW QUESTION 110
In RouterOS queue configurations the word "total" ussually represents
- A. download - upload
- B. upload
- C. download
- D. upload + download
Answer: D
NEW QUESTION 111
What does this simple queue do (check the image)?
- A. Queue limits host 192.168.1.10 download data rate to one megabit per second.
- B. Queue guarantees download data rate of one megabit per second for host 192.168.1.10
- C. Queue limits host 192.168.1.10 upload data rate to one megabit per second.
- D. Queue guarantees upload data rate of one megabit per second for host 192.168.1.10
Answer: C
NEW QUESTION 112
What does the firewall action "log" do?
- A. It adds a prefix to the packet and passes it through
- B. It logs and blocks the packet
- C. It logs the packet
- D. It blocks and logs the packet
Answer: C
NEW QUESTION 113
What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?
- A. Internet
- B. Host-to-Host
- C. Network Access
- D. Application
Answer: B
NEW QUESTION 114
Which WLAN IEEE specification allows up to 54Mbps at 2.4GHz?
- A. N
- B. B
- C. A
- D. G
Answer: D
NEW QUESTION 115
Which are necessary sections in /queue simple to set bandwidth limitation?
- A. target-address, dst-address
- B. target-address, dst-address, max-limit
- C. max-limit
- D. target-address, max-limit
Answer: D
NEW QUESTION 116
It is possible to create a configuration where VLAN and PPTP interfaces are bridged together.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION 117
What does the command routerA(config)#line cons 0 allow you to perform next?
- A. Set the Telnet password.
- B. Disable console connections.
- C. Shut down the router.
- D. Set your console password.
Answer: D
NEW QUESTION 118
During a scan, in order to see all the available wireless frequencies that are supported by the card, the following option must be selected in the wireless card's "Frequency Mode":
- A. manual txpower
- B. regulatory domain
- C. superchannel
Answer: C
NEW QUESTION 119
What does the passive command provide to dynamic routing protocols?
- A. Stops the router from receiving any dynamic updates.
- B. Stops an interface from sending periodic dynamic updates but not from receiving updates.
- C. Stops the router from sending any dynamic updates.
- D. Stops an interface from sending or receiving periodic dynamic updates.
Answer: B
NEW QUESTION 120
The correct order for PPPOE discovery stage is
- A. Request, Offer, Initialization and Session confirmation
- B. Initialization, Offer, Request and Session confirmation
- C. Request, Initialization, Session confirmation and Offer
- D. Initialization, Session confirmation, Request and Offer
Answer: B
NEW QUESTION 121
You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.
- A. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
- B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
- C. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
- D. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
- E. kind=pcq pcq-rate=256000 pcq-classifier=src-address
Answer: D,E
NEW QUESTION 122
What is the minimal possible wireless configuration to create an Access Point?
- A. WDS
- B. band
- C. radio name
- D. mode
- E. DFS mode
- F. ssid
- G. frequency
- H. scan-list
Answer: D
NEW QUESTION 123
For a Simple Queue to apply a bandwidth restrictions on a bridged interface, following must be done:
- A. Associate the Simple Queue to the bridge interface
- B. Enable 'Use IP Firewall' in bridge settings
- C. Use mangle to mark the connections
- D. Configure an IP address on the bridge interface
Answer: C
NEW QUESTION 124
......
Difficulty in Writing MikroTik Certified Network Associate (MTCNA) Exam
For those candidates who do not exercise during prep work, the MikroTik Certified Network Associate (MTCNA) exam is very difficult and candidates need a practice environment as well. Functional direct exposure is then greatly needed to grasp the components of the test. So, if any person can not afford the laboratory and also do not have time to exercise, it would be better if he is affiliated with some kind of a company where he has opportunities to practice. As the popularity of the MikroTik Certified Network Associate (MTCNA) certified increases, MikroTik upgrades its tech system and brings brand-new innovations to the market. The complexity of passing the MikroTik Certified Network Associate (MTCNA) exam is also increased by this. To survive in the IT sector, candidates must pass the MikroTik Certified Network Associate (MTCNA) exam. Refer to the links down below for MTCNA exam dumps and other materials, sample problems, and MTCNA practice exam dumps for your preparation. Practicing the sample questions will guarantee your success in the MikroTik accreditation exam at the first attempt. The material is kept up to date regularly.
Actual4Cert provide MTCNA exam dumps which have, over the years, proved out to be the best learning materials and have ensured unbelievable passing rates.
Updated MikroTik MTCNA Dumps – Check Free MTCNA Exam Dumps: https://www.actual4cert.com/MTCNA-real-questions.html
Valid MTCNA exam with MikroTik Real Exam Questions: https://drive.google.com/open?id=1CI3LZ6kRiJihkOzjibXw7bj5dHzXtVSD