Jul-2024 SAP C_SACS_2316 Actual Questions and Braindumps
C_SACS_2316 Dumps To Pass SAP Exam in 24 Hours - Actual4Cert
SAP C_SACS_2316 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 32
Which of the following are necessary for Linked Analysis?
- A. Multiple pages
- B. Multiple stories
- C. Multiple widgets
- D. Multiple data models
Answer: C
Explanation:
Linked Analysis is a feature that allows you to link multiple widgets in a story based on the same model. You can use Linked Analysis to do the following:
Filter data in multiple widgets by selecting a data point in one widget. For example, if you select Soft Drinks in a chart, all the other linked widgets will show data for Soft Drinks only.
Drill down or up in multiple widgets by changing the level of detail in one widget. For example, if you drill down from Product Category to Product Name in a table, all the other linked widgets will show data for Product Name as well.
Highlight data in multiple widgets by hovering over a data point in one widget. For example, if you hover over Germany in a geo map, all the other linked widgets will highlight the data for Germany.
To use Linked Analysis, you need to have the following:
Multiple widgets based on the same model. You can link any type of widget, such as charts, tables, geo maps, etc., as long as they are based on the same model.
A common dimension or measure between the widgets. You can link widgets based on any dimension or measure that they share in common.
You do not need to have the following for Linked Analysis:
Multiple stories. You can use Linked Analysis within the same story. You cannot link widgets across different stories.
Multiple data models. You can use Linked Analysis with one model only. You cannot link widgets based on different models.
Multiple pages. You can use Linked Analysis within the same page. You cannot link widgets across different pages.
Therefore, the correct answer is Multiple widgets, as it is the necessary element for Linked Analysis. Verified Reference:Link Widgets with Linked Analysis
NEW QUESTION # 33
What is the maximum number of screens you can connect to the Digital Boardroom?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 34
Which sort options are available in stories?Note: There are 2 correct answers to this question.
- A. Dimensions and measures together
- B. Ascending and descending order
- C. Multiple dimensions together
- D. Multiple measures together
Answer: B,C
NEW QUESTION # 35
For which of the following tasks can you use an input control? Note: There are 2 correct answers to this question.
- A. Define a prompt
- B. Filter dimension or measure
- C. Select dimension or measure
- D. Explore data relationships
Answer: B,C
Explanation:
An input control is a type of filter that allows you to dynamically change the values of dimensions or measures in your story or application. You can use an input control to filter dimension or measure values and select dimension or measure values for your widgets, such as charts, tables, or geo maps1. For example, you can create an input control that lets you choose which product category or year to display in your chart2.
You cannot use an input control to define a prompt or explore data relationships. A prompt is a filter that is applied to a model before the data is loaded into a story or an application. Prompts allow you to select the data that you want to see in your story or application. You can create prompts in the modeler, not in the story or application3. To explore data relationships, you can use the Smart Discovery feature, which allows you to automatically generate insights and visualizations based on your dat a. You can access Smart Discovery from the context menu of a chart or table widget4.
NEW QUESTION # 36
How does the SAP Digital Boardroom support engaging with a remote audience? Note: There are 2 correct answers to this question.
- A. Through screen sharing
- B. Through annotations
- C. Through Data Analyzer
- D. Through story editing
Answer: A,B
NEW QUESTION # 37
In which of the following are datapoint comments stored?
- A. In the widget
- B. In the story
- C. In the page
- D. In the data model
Answer: B
NEW QUESTION # 38
Which page type is recommended when designing stories?
- A. Canvas
- B. Responsive
- C. Grid
Answer: B
NEW QUESTION # 39
You are using a model that includes a prompt.When is the prompt presented at runtime?
- A. Before data can be displayed
- B. After all widgets are rendered
- C. Before predefined widgets are rendered
- D. After navigating to the widget based on the model
Answer: A
NEW QUESTION # 40
What language does the Custom Expression Editor use?
- A. dWrangling Expression Language
- B. Hypertext Markup Language
- C. JavaScript
- D. Structured Query Language
Answer: A
Explanation:
The Custom Expression Editor is a tool that allows you to create complex calculations using a syntax called Wrangling Expression Language (WEL). WEL is a domain-specific language that is designed for data manipulation and analysis. WEL supports various operators, functions, and constants that you can use to create custom expressions. You can access the Custom Expression Editor from various places in SAP Analytics Cloud, such as models, stories, datasets, etc. Therefore, the correct answer is Wrangling Expression Language, as it is the language that the Custom Expression Editor uses. Verified Reference:Create Custom Expressions with the Custom Expression Editor
NEW QUESTION # 41
When converting a story to Optimized Design Experience, what happens if the story contains elements that are not yet supported?
- A. You receive a warning with information about what you must change.
- B. The unsupported elements become placeholders.
- C. You receive a warning that the story will be deleted.
- D. The unsupported elements are deleted.
Answer: D
Explanation:
When converting a story to Optimized Design Experience, you need to be aware that some elements that are available in the Classic Design Experience are not yet supported in the Optimized Design Experience. These elements include:
Grid pages
Linked analysis
Geo maps
Images
Shapes
Texts
Buttons
Input controls
Value driver trees
Explorer
If your story contains any of these elements, you will receive a warning message before converting the story, informing you that these elements will be permanently deleted from the story. You can choose to proceed with the conversion or cancel it. If you proceed, the unsupported elements will be removed from the story, and you will not be able to restore them1.
Reference:
1: Optimized Story Experience | SAP Help Portal
NEW QUESTION # 42
To which of the following can you add a section?
- A. Canvas page
- B. Chart
- C. Digital Boardroom
- D. Table
Answer: A
Explanation:
You can add a section to a canvas page in a story. A section is a container that holds one or more widgets and can be used to group related content or apply filters. A digital boardroom, a table, and a chart are not valid targets for adding a section; they are either different types of presentations or widgets that can be added to a section. Verified Reference: [SAP Analytics Cloud - Sections]
NEW QUESTION # 43
Which calculation type can you use to categorize dimension members?
- A. Dimension to measure
- B. Measure-based dimension
- C. Calculated dimension
- D. Difference from
Answer: B
NEW QUESTION # 44
What are the presentation types for the Digital Boardroom? Note: There are 2 correct answers to this question.
- A. Canvas
- B. Custom
- C. Agenda
- D. Dashboard
Answer: C,D
NEW QUESTION # 45
Which link types can you use to blend data in a story? Note: There are 3 correct answers to this question.
- A. Intersecting data only
- B. All data
- C. Inner data
- D. All primary data
- E. Outer data
Answer: A,B,D
NEW QUESTION # 46
Which filter options are supported in the Optimized Design Experience? Note: There are 3 correct answers to this question.
- A. Controls
- B. Section
- C. Widget
- D. Story
- E. Input Control
Answer: C,D,E
NEW QUESTION # 47
Which of the following does a component filter affect?
- A. Story
- B. Itself
- C. Model
- D. Version
Answer: B
Explanation:
A component filter affects only itself, meaning that it applies a filter to the data displayed in a single widget, such as a chart or a table. A component filter does not affect the story, the version, or the model; these are different levels of filtering that can be applied to the data in a story. Verified Reference: [SAP Analytics Cloud - Filter Data in Stories]
NEW QUESTION # 48
Which of the following are required to configure a section in a story? Note: There are 2 correct answers to this question.
- A. Widget
- B. Classic Design Experience
- C. Optimized Design Experience
- D. Dimension
Answer: A,D
NEW QUESTION # 49
In a table you display a time hierarchy with the years 2024, 2025, and 2026. Months, quarters, and half years are also displayed for each year. You want to apply the formatting of the year 2024 to the years 2025 and 2026. In styling rules, which level option do you select?
- A. Self and Children
- B. Self and Descendants
- C. Self
- D. Self and Siblings
Answer: B
Explanation:
To apply the formatting of the year 2024 to the years 2025 and 2026, you need to use the level option Self and Descendants in the styling rules. This option applies the formatting to the selected member and all its lower-level members in the hierarchy1. In this case, the selected member is the year 2024, and its lower-level members are the months, quarters, and half years that belong to 2024. The formatting will also be applied to the years 2025 and 2026, and their lower-level members, because they are at the same level as 2024 in the hierarchy.
The other level options are:
Self: This option applies the formatting only to the selected member, not to any other members in the hierarchy1. In this case, the selected member is the year 2024, and the formatting will not be applied to any other years or lower-level members.
Self and Siblings: This option applies the formatting to the selected member and all its siblings, which are members at the same level in the hierarchy1. In this case, the selected member is the year 2024, and its siblings are the years 2025 and 2026. The formatting will be applied to these three years, but not to their lower-level members.
Self and Children: This option applies the formatting to the selected member and its immediate children, which are members one level below in the hierarchy1. In this case, the selected member is the year 2024, and its immediate children are the quarters and half years that belong to 2024. The formatting will be applied to these members, but not to any other years or months.
Reference:
1: Styling Rules for Tables
NEW QUESTION # 50
Which of the following are required to configure a section in a story? Note: There are 2 correct answers to this question.
- A. Widget
- B. Classic Design Experience
- C. Optimized Design Experience
- D. Dimension
Answer: A,D
Explanation:
A section is a way to group and organize widgets in a story based on a dimension. To create a section, you need to have the following:
A dimension that you want to use as the basis for grouping the widgets. You can choose any dimension from any model in the story.
One or more widgets that you want to display in each section. You can add any type of widget, such as charts, tables, geo maps, etc.
You can create sections in both the Classic Design Experience and the Optimized Design Experience, but the process is slightly different. Therefore, the correct answer is dimension and widget, as they are required to configure a section in a story
NEW QUESTION # 51
What term refers to dimension members with no numeric data values associated with them?
- A. Unbooked
- B. Booked
- C. Transformed
- D. Exception aggregation
Answer: A
Explanation:
Unbooked is the term that refers to dimension members with no numeric data values associated with them. For example, if a dimension has members A, B, C, and D, and only A and B have numeric values in a measure column, then C and D are unbooked members. Booked, transformed, and exception aggregation are not terms that describe dimension members. Verified Reference: [SAP Analytics Cloud - Unbooked Data]
NEW QUESTION # 52
What can be done with story filters?
- A. They can be implemented without a model in a template.
- B. They can be applied to all widgets based on the same model.
- C. They can be used to change dimensions in a widget.
Answer: B
NEW QUESTION # 53
When converting a story to Optimized Design Experience, what happens if the story contains elements that are not yet supported?
- A. The unsupported elements become placeholders.
- B. You receive a warning with information about what you must change.
- C. The unsupported elements are deleted.
- D. You receive a warning that the story will be deleted.
Answer: B
NEW QUESTION # 54
......
Download the Latest C_SACS_2316 Dump - 2024 C_SACS_2316 Exam Question Bank: https://www.actual4cert.com/C_SACS_2316-real-questions.html
Buy Latest C_SACS_2316 Exam Q&A PDF - One Year Free Update: https://drive.google.com/open?id=1E22aFuLr8yZY9BGDDuaXdvfRt35KDR4G