Pass Exam With Full Sureness - VMCE_V10 Dumps with 50 Questions
Verified VMCE_V10 dumps Q&As - 100% Pass from Actual4Cert
NEW QUESTION 30
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs.
What could be the reason? (Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. The VM is in a backup chain and trapped inside a single retention file
- C. The VMs were moved to different datastores manually
- D. Jobs are configured as per VM and these particular VM's need more fulls
- E. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
Answer: C,D
Explanation:
Explanation: Section: (none)
NEW QUESTION 31
Which of the following statements are true regarding backup copy jobs in Veeam Backup & Replication? (Choose two.)
- A. The backup copy job creates a single file with multiple restore points included within for archival purposes
- B. Backup copy jobs copy entire VBK, VIB, or VRB files from the source backup repository to the target backup repository
- C. During the backup copy job process, a VM snapshot is created for consistency
- D. Retention settings maintain the desired number of restore points as well as offer optional GFS for archival purposes
- E. The backup copy job creates a forever forward incremental backup chain
Answer: D,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/about_backup_copy.html?ver=100
NEW QUESTION 32
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. File to tape
- B. Backup to tape
- C. Replication
- D. Backup copy
Answer: C
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/replication.html?ver=100
NEW QUESTION 33
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. Virtual disk restore
- B. Instant VM Recovery with "secure restore"
- C. Instant VM Recovery with "staged restore"
- D. SureBackup
Answer: B
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100
NEW QUESTION 34
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Use the preferred network settings to switch to data network for the backup traffic
- B. Update routing tables on the components involved in data transfer
- C. Create a global network traffic rule, set appropriate source and target IP range
- D. Re-add all Veeam components involved in data transfer through the required interfaces
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/select_backup_network.html?ver=100
NEW QUESTION 35
A company needs to recover a domain controller from a backup file they have on premises which was created by the Veeam Agent for Microsoft Windows. Which of the following would provide the fastest access to the domain controller?
- A. Use the Veeam Explorer for Active Directory to recover the domain controller
- B. Recover the domain controller to an AWS EC2 instance using the restore to Amazon EC2
- C. Perform an Instant VM Recovery to recover the domain controller to a VM on their VMware host
- D. Perform a bare metal recovery of their domain controller back to the original system
Answer: C
Explanation:
Reference: https://www.veeam.com/blog/how-to-recover-a-domain-controller-best- practices-for-ad- protection.html
NEW QUESTION 36
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- B. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- C. Configure a backup copy job in mirror mode, to a repository on the second site
- D. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
Answer: A
NEW QUESTION 37
A company is required to have a daily backup with a retention of at least six weeks. The backups are running every eight hours during the day. From the options provided, what backup job would you advise based on their SLA and best practices?
- A. Forever forward incremental backup, with a retention of 42 restore points, savings six weekly full backups
- B. Forward incremental backup with weekly synthetic full backups and a retention of 42 days
- C. Forever forward incremental backup, with default job settings enabled
- D. Forever forward incremental backup, with a retention of 42 restore points
Answer: C
NEW QUESTION 38
A company has been running off replicated, business-critical VMs at their disaster recovery location since an earthquake near the primary data center occurred. Since the threat has passed, they want to stop the replicas and switch to the VMs at the primary data center without losing data. Which of the following actions is the first step they should take?
- A. Failback to production
- B. Undo failover
- C. Permanent failover
- D. Planned failover
- E. Commit failback
- F. Failover
Answer: E
NEW QUESTION 39
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A standard virtual switch without uplink(s)
- C. A distributed virtual switch without uplink(s)
- D. A distributed virtual switch with uplink(s)
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
100
NEW QUESTION 40
A company has outgrown their current data center and plans to use the second data center as the new primary and needs to migrate their workloads. They are running VMware in both data centers. Which steps would allow this migration to occur without any data loss?
- A. 1. Replication job
2.Failback
3.Commit failback - B. 1. Replication job
2.Planned failover
3.Permanent failover - C. 1. Backup job
2.Instant VM Recovery
3.Finalize the Instant VM Recovery - D. 1. Replication job
2.Failover plan
3.Permanent failover
Answer: D
NEW QUESTION 41
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. The VM replica must have access to the repository where the full backup of the VM resides
- B. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- C. Perform failback to VM within the same subnet
- D. Indexing must be enabled for the original VM
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/failback_quick_rollback.html?ver=100
NEW QUESTION 42
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use Instant VM Recovery
- B. Use a failover plan
- C. Use a planned failover
- D. Use on-click failover
Answer: A
Explanation:
Reference: https://www.veeam.com/virtual-machine-backup-solution-free.html
NEW QUESTION 43
Select the correct description of a synthetic full backup.
- A. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
- B. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- C. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/synthetic_full_backup.html?ver=100
NEW QUESTION 44
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
- A. For backup data only
- B. Optimized for advanced scalability deployment
- C. Optimized for typical deployment
- D. For vCenter data only
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION 45
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Raw data every 20 seconds
- B. Aggregated data every two hours
- C. Data does not exist
- D. Aggregated data every five minutes
Answer: B
NEW QUESTION 46
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- B. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
- C. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- D. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
Answer: B
NEW QUESTION 47
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup? (Choose three.)
- A. Replication job
- B. Backup proxy
- C. Application group
- D. SureBackup job
- E. Virtual lab
- F. Gateway Server
Answer: A,D,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/recovery_verification_overview.html?v er=100
NEW QUESTION 48
A financial company is looking for a new backup application. One of their main requirements is the ability to have quick access to their backup data. What features in Veeam Backup & Replication support the rapid availability of data, applications and VMs?
(Choose three.)
- A. Full VM recovery without quick rollback
- B. Bare metal recovery
- C. Instant VM disk recovery
- D. Microsoft SQL database, and Oracle database publishing
- E. Instant VM Recovery
- F. Restore to Amazon EC2
Answer: A,D,F
NEW QUESTION 49
When configuring a SureBackup job, what are some of the criteria for adding servers to an application group? (Choose two.)
- A. VMs cannot be added to an application group twice
- B. VMs must be running the same OS version
- C. VM backups must reside on the same repository
- D. VMs cannot be encrypted
- E. VMs must have at least one valid restore point
Answer: A,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/appgroup_vms_vm.html?ver=100
NEW QUESTION 50
......
VMCE_V10 Dumps Full Questions - Exam Study Guide: https://www.actual4cert.com/VMCE_V10-real-questions.html